1. ACLI Configuration Guide
  2. Appendix RTC Support
  3. RTC Support

RTC Support

This appendix summarizes real-time configuration (RTC) support status for the Oracle® Enterprise Session Border Controller . The table below lists which configuration elements are supported by RTC and which are not.

ACLI Configuration Elements Parameter Details
Access Control N/A
Accounting Config N/A
Authentication N/A
Certificate Record N/A
Class Profile N/A
Codec Policy N/A
DNS ALG Service N/A
DNS Config N/A
Enum N/A
External Policy Server N/A
External Policy Server The following H.323 stack subelement parameters are not RTC supported in that, if you save and activate a configuration, calls already in progress are dropped and a reboot is required:
  • state
  • isgateway
  • realm-id
  • assoc-stack
  • options
  • proxy-mode
  • local-ip
  • max-calls
  • max-channels
  • registration-ttl
  • terminal-alias
  • prefixes
  • ras-port
  • q931-port
  • auto-gk-discovery
  • multicast
  • gatekeeper
  • h245-tunneling
  • gk-identifier
  • alternate-transport
  • q931-max-calls
  • filename
H.323 N/A
IPSEC N/A
IWF N/A
Licensing N/A
Local Policy N/A
Local Response Map N/A
Local Routing Config N/A
Media Manager The Media Manager element is supported with the exception of the following parameters:
  • red-flow-port
  • red-max-trans
  • red-sync-start-time
  • red-sync-comp-time
Media Policy N/A
Media Profile N/A
Network Interface N/A
Net Management Control N/A
Network Parameters The Network Parameters element is supported with the exception of the following parameters:
  • SCTP parameters
NTP Sync N/A
Packet Trace Config N/A
Q850 SIP Map N/A
Realm Config N/A
Redundancy Config The Redundancy Config element is supported with the exception of the following parameters:
  • state
  • port
  • cfg-port
  • cfg-max-trans
  • cfg-sync-start-time
  • cfg-sync-comp-time
Session Agent N/A
Session Group N/A
Session Router N/A
Session Constraints N/A
Session Translation N/A
SIP Config The SIP Config element is supported with the exception of the following parameters:
  • red-sip-port
  • red-max-trans
  • red-sync-start-time
  • red-sync-stop-time
SIP Feature N/A
SIP Interface The SIP Interface element is supported with the exception of the following parameters:
  • collect, boot-state
SIP Manipulation N/A
SIP NAT The SIP NAT element is supported with the exception of the following parameters:
  • ext-address
SIP Response Map N/A
SNMP N/A
Static Flow N/A
Steering Pool N/A
Surrogate Agent N/A
System The System Config element is supported with the exception of the following parameters:
  • options
Test Pattern Rule N/A
Test Policy N/A
Test Translation N/A
TLS Global When configured to support MSRP over TLS, this configuration element is not RTC enabled. If a single TLS profile is used by both SIP and MSRP, RTC changes are applied for the SIP TLS configuration only.
TLS Profile N/A
Translation Rules N/A
Trap Receiver N/A