March 2022 |
|
May 2022 |
- Adds local-port-match-max and remote-port-match-max
in Security Policy Configuration in Security chapter.
- Removes asymmetric preconditions feature, which does
not apply to enterprise product.
- Clarifies sequence for sending queries to the
primary and backup DNS servers.
- Highlights that save and activate are not relevant
to a standby system in HA pair feature setup procedure.
- Reorganization changing Surrorgate Agent
placement.
- Add username restrictions to local-accounts.
|
August 2022 |
- Updates certificate record config to include limits
of 'state' field.
- RemovedsECDSA from PKCS12 note.
- Clarifies use of add-index in
translation-rules.
- Corrects default tls-version.
- Adds limitation that hardware platform SBCs support
a maximum of 4 ENUM servers.
- Adds content for S-Cz9.1.0p2.
- Adds a note about
sip-dynamic-hnt in Adaptive NHT
Configuration section.
- Adds details about
min-reg-expire in HNT Configuration
section.
- Adds the "Secure Browsing with the HSTS Header" and
" Enable the HSTS Header" topics to the Web Server TLS
Configuration chapter.
|
October 2022 |
- Adds recommendation on forwarding core configuration
based on the use of PMD drivers.
- Updates the "Kill Web <session>" topic.
- Clarifies the requirement for media-policy for
setting all DSCP codes on egress, and includes passthrough
configuration.
- Adds that a realm of * takes precedence over other
matching entries in Telepony Fraud Protection Target Matching
Rules.
- Updates note about order of codecs in Conditional
Codec Policies section.
|
November 2022 |
- Corrects use of anonymous-priority in local-policy
configuration.
- Fixes various typographical errors.
- Updates "Telephony Fraud Protection Target Matching
Rules" section to include information about realm
precedence.
|
December 2022 |
- Updates the "MSRP Management Monitoring"
topic.
|
February 2023 |
- Updates LRT details in Multi-Tiered LRT Route
Selection section in Session Routing and Load Balancing
chapter.
- Removes unsupported feature Daylong Transcoding
Session Cleanup section from Transcoding chapter.
- Updates comfort noise transcoding support details
in Supported and Unsupported Platforms and Behavior section in
transcoding chapter.
- Updates Voice Scenario 3 in Transcoding
chapter.
- Adds missing DSCP-NSEP tasks.
- Updates range for priority attribute of
security-policy.
- Adds the Reason Attestation and SIP to HTTP Header
Mapping features at 910p5.
- Adds port 3799 to the Authentication source-port
parameter.
- Corrects value list for manual, auth-algo
parameter.
|
May 2023 |
- Removes the STIR/SHAKEN chapter.
- Adds HTTP client management description.
- Corrects the sip-interface, sip-ports, ports.
minimum acceptable value.
- Corrects the sip-config acceptable values for the
following parameters:
- inactive-dynamic-conn
- invite-expire
- trans-expire
- max-timer
- init-timer
- Clarifies the effect on media release when you set
nat-traversal to always.
- Updates the "HMU Support for RTP to SRTP
Interworking" and "HMU Configuration" topics. Removes the
"Configure HMU Support for RTP and SRTP Interworking"
topic.
- Clarifies that wancom-health-score has no effect on
a phy-interface set to media.
- Clarifies the efffect of stop-sag-recurse.
- Adds valid range values for q850-cause.
- Fixes various typographical errors.
- Corrects the following sip-interface acceptable
values:
- max-nat-interval
- nat-int-increment
- nat-test-increment
- Adds recommendation that the user does not disable
and re-enable an operational sip-interface with TCP ports.
- Removes media-if-peercheck-time switchover
warning.
- Adds detail wherein the system suppresses a
re-INVITE during REPLACES processing.
- Adds limitation when using the SurrogateContact SPL
module.
- Adds PSAP callback and Pooled transcoding features
at S-Cz9.1.0p6.
- Updates AMR-NB and AMR-WB Specifications for
accuracy.
- Adds missing redirect-action parameter.
- Adds a note that the ELIN SPL is not supported on
the Session Router.
- Removes deprecated translate-non-inband-event.
- Corrects the value range for nat-interval.
- Adds a Note to the "Telephony Fraud Protection"
topic that the Enterprise Session Router does not support
Telephony Fraud Protection.
- Corrects ptimes for ILBC (13.33 and 15.2)
- Differentiates ptimes for transcodable codecs for
vSBC and points to the release notes for the vSBC transcodable
codec list.
- Clarifies the use of default-2833-duration and
rfc2833-timestamp
- Updates TACACS cmd/cmd-arg description
|
July 2023 |
- Adds TCM3 content at S-Cz9.1.0p7
- Removes duplicate Restricted Media Latching
content.
|
September 2023 |
- Adds steering pool content at S-Cz9.1.0p8.
- Adds the sa-routes-stats and sa-routes-traps
parameters.
- Clarifies where Baudot to T.140 is available.
|
November 2023 |
- Clarifies DynamicTCP and DynamicTLS operation.
- Adds protocols to system-access-list.
- Adds the httpclient-cache-size-multiplier
parameter.
- Adds Codec table with EVS details.
- Removeds old reference to TLS license.
- Corrects caps in proxy-mode values.
- Adds OCSP cert-status-profile details.
- Fixsd alarm-threshold value range.
- Adds Intel limitation for software
transcoding.
- Adds the httpclient-cache-size-multiplier parameter
at S-Cz9.1.0p9.
- Removes references to the deprecated session-agent,
allow-next-hop-lp parameter.
|
February 2024 |
- Updates "SIP HNT Forced Unregistration
Configuration" with a note clarifying force-unregistration
option's requirements.
- Clarifies that network-interface is not RTC
supported.
- Provides reasoning for r-factor data seeming to
conflict with MOS.
- Adds session-level DoS feature at
S-Cz9.1.0p10.
- Adds http-clearDead-conn-timer feature at
S-Cz9.1.0p10.
- Updates note about iLBC call establishment in
transcoded call topic.
|
April 2024 |
- Updates "LDAP Messages."
- Adds information about SSH keys with HA.
- Updates SDES Profile Configuration for accuracy.
- Updates IDS Phase 2 (Advanced Reporting) to clarify that it is
supported on both Enterprise and Service Provider platforms and
does not require a special license.
|
June 2024 |
- Clarifies the impact of changing the add-icmp-ip and remove-icmp-ip
parameters on established calls.
- Updates the Add an SSH Known Host Key to correct the ssh-key
command syntax.
- Adds a note to the Manual Trigger Confirmation topic regarding
the show sipd endpoint-ip <phone-number> output.
- Updates the Manipulation Modes and Manipulation Modes in Codec
Policies with note about using the Force attribute.
|
August 2024 |
- Updates the Add an SSH Known Host Key to include examples of the
ssh-key command.
|