Add an FXO-FXS Profile

When your deployment requires Foreign Exchange Office-Foreign Exchange Subscriber (FXO-FXS) profiles, you can add up to four profiles each to support different attributes at different endpoints. For example, you might create profiles based on user name, department, location, and so on. You can create FXO profiles only, FSO profiles only, or both. To configure the FXO-FXS profiles, go to TDM Config under System, and create the profiles that you need.

• Requires the FXO-FXS interface

The configuration process includes configuring TDM Config and a corresponding FXO Profile or FXS Profile.

1. Access the tdm-config configuration element.

   ORACLE# configure terminal
   ORACLE(configure)# system
   ORACLE(system)# tdm-config
   ORACLE(tdm-config)#

2. In tdm-config, set the following:

   state	Enable or disable the configuration. Default: Disabled.
   logging	Enable or disable logging. Default: Disabled.
   line mode	The system sets Analog, when it detects the FXO-FXS interface.
   tone zone	Set the tone zone value. Default: us. Valid values: ae | ar | at | au | be | bg | br | ch | cn | cr | cz | de | dk | ee | es | fi | fr | gr | hu | il | in | it | jp | lt | mo | mx | my | nl | no | nz | pa | ph | pl | pt | ru | se | sq | th | tw | uk | us | us-old | ve | za. Default: us.
   caller id	Set the type of caller ID for CLIP and COLP that you want for this profile. Default: No. Valid values: no, rpid (remote-party-ID), pai (p-asserted-ID).
   called-type-of-number	Set the type of Number and Numbering Plan associated with Called Party information. Valid values: unknown | local | national | international | dynamic.
   calling-type-of-number	Set the type of Number and Numbering Plan associated with Calling Party information. Valid values: unknown | local | national | international | dynamic.

3. For each fxo-profile and fxs-profile that you want to create, set the following:

   name	Enter a name for this profile.
   channels	Enter the channels that apply to this profile. You can enter any combination of the four that apply to the particular card. FXS—1,2,3,4 FXO—5,6,7,8
   rx-gain	Set the TDM receive volume in decibels. Default: 0.0. Valid values: 0.0-9.9.
   tx-gain	Set the TDM transmit volume in decibels. Default: 0.0. Valid values: 0.0-9.9.
   echo-cancellation	Enable or disable. Default: Enabled.
   fax-detect	For fax transcoding, set fax-detect to one of the following: both (default) incoming outgoing no
   route-group	Enter the number of the route-group for this profile. Range: 0-63.
   signaling	Set the signaling type. For the fxo-profile—Valid values: fxs_ls, fxs_gs, fxs_ks. Default: fxs_ks. For the fxs-profile—Valid values: fxo_ls, fxo_gs, fxo_ks. Default: fxo_ks.
   phone-number	Enter the caller's number. Required.
   full-name	Enter the caller's name.
   cid-signaling	Set the caller ID signaling type. Default: Bell. Valid values: Bell, v23, v23_ip, dtmf, of smdi.

4. Type done to save the configuration.

• Run the TDM Configuration Wizard.
• Configure the inbound and outbound TDM local policies.