4.2 System Configuration

These steps can be performed on ELAP system. For mated pairs, commands should be run on both of the servers. Assuming, MPS A is ACTIVE.

STEP # Steps To Be Completed Expected output/command to be executed
1. MPS X: Login as elapdev login: elapdev password: <elapdev_password>
2. MPS X: Record and verify the system configuration Select Option 1 from elapconfig menu. $ sudo su - elapconfig
Select Option 1 from elapconfig menu.


GUI after selecting Option 1 from elapconfig menu

3. MPS X: Record and verify the ntp configuration Select Option 7 from elapconfig menu and then Option 1 from ELAP Configure NTP Server Menu. $ sudo su - elapconfig
Select Option 7 from elapconfig menu


Select Option 1 from ELAP Configure NTP Server Menu.

4. MPS X:Exit from elapconfig menu
Exit from elapconfig menu


ELAP Config Menu

5. MPS X: Record /etc/hosts configuration
$ cat /etc/hosts

 Do not modify this file by hand. Refer to Tekelec Configuration
 documentation.
The order of the aliases in this file is significant to the installation process.

127.0.0.1       localhost loghost Floater-3-prova-bkup mate-provb-bkup
192.168.120.100  dsmm-a
192.168.121.100  dsmb-a
192.168.120.200  dsmm-b
192.168.121.200  dsmb-b
169.254.1.200    mate sync-b hasync-1a
169.254.1.100    sync-a hasync-1b
192.168.123.100  dsmvip-a
192.168.123.200  dsmvip-b
169.254.1.201    mate-ipdptp0 server_ppp0
169.254.1.202    mate-ppp client_ppp0
169.254.1.101    Floater-3-ipdptp0 server_ppp1
169.254.1.102    Floater-3-ppp client_ppp1
169.254.1.1      switch1A
169.254.1.2      switch1B
10.75.124.247           
10.75.141.107           Floater-3 prova-ip
10.75.141.108           mate-prov provb-ip Floater-4
10.75.141.109           prov-vip
6. MPS X: Verify and Record IPs configured on each interface.
$ ifconfig -a
bond0     Link encap:Ethernet  HWaddr 00:00:17:0E:A6:9F
          inet6 addr: fe80::200:17ff:fe0e:a69f/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:1929134 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19001949 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:144187191 (137.5 MiB)  TX bytes:28087840989 (26.1 GiB)
bond0.1   Link encap:Ethernet  HWaddr 00:00:17:0E:A6:9F
          inet addr:169.254.1.100  Bcast:169.254.1.255  Mask:255.255.255.0
          inet6 addr: fe80::200:17ff:fe0e:a69f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1916373 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1366320 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:116466961 (111.0 MiB)  TX bytes:26923908883 (25.0 GiB)
bond0.3   Link encap:Ethernet  HWaddr 00:00:17:0E:A6:9F
          inet addr:192.168.121.100  Bcast:192.168.121.255  Mask:255.255.255.0
          inet6 addr: fe80::200:17ff:fe0e:a69f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12253 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12246 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:685938 (669.8 KiB)  TX bytes:681040 (665.0 KiB)
bond1     Link encap:Ethernet  HWaddr B2:69:BB:E5:71:36
          BROADCAST MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
bond2     Link encap:Ethernet  HWaddr 7E:7E:C9:9E:5E:FA
          BROADCAST MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
bond3     Link encap:Ethernet  HWaddr EE:AC:C5:EC:28:BE
          BROADCAST MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
eth01     Link encap:Ethernet  HWaddr 00:00:17:0E:A6:A1
          inet addr:10.75.141.47  Bcast:10.75.141.127  Mask:255.255.255.128
          inet6 addr: 2606:b400:605:b917:200:17ff:fe0e:a6a1/64 Scope:Global
          inet6 addr: fe80::200:17ff:fe0e:a6a1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8390156 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7898637 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1310423076 (1.2 GiB)  TX bytes:724420390 (690.8 MiB)
          Memory:fdee0000-fdefffff
eth02     Link encap:Ethernet  HWaddr 00:00:17:0E:A6:A0
          inet addr:192.168.120.100  Bcast:192.168.120.255  Mask:255.255.255.0
          inet6 addr: fe80::200:17ff:fe0e:a6a0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12250 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12255 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:857300 (837.2 KiB)  TX bytes:681418 (665.4 KiB)
          Memory:fde60000-fde7ffff
eth03     Link encap:Ethernet  HWaddr 00:00:17:0E:A6:9F
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:1929134 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19001949 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:144187191 (137.5 MiB)  TX bytes:28087840989 (26.1 GiB)
          Memory:fdfe0000-fdffffff
eth04     Link encap:Ethernet  HWaddr 00:00:17:0E:A6:9F
          UP BROADCAST SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Memory:fdf60000-fdf7ffff
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1605595 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1605595 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:106538690 (101.6 MiB)  TX bytes:106538690 (101.6 MiB)
lo:1      Link encap:Local Loopback
          inet addr:192.168.123.100  Mask:255.255.255.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
7. MPS X: Record EuiDB settings
$ uiEdit
"LNP_ENABLED" is set to "TRUE"
"Alarms_Purged_Nb_Days" is set to "30"
"new_user_default_groups" is set to "readonly"
"max_passwd_age" is set to "60"
"EBDAD_LSMS_PORT" is set to "1030"
"max_concurrent_user_logins" is set to "1"
"ELAP_A_DSM_LPBK_NETWORK_ADDRESS" is set to "192.168.123.100"
"max_concurrent_logins" is set to "20"
"ELAP_A_NAME" is set to "Floater-3"
"ELAP_RELEASE" is set to "10.1.1"
"ELAP_LOGGING_REMOTE_USERNAME" is set to ""
"ELAP_A_SYNCH_NETWORK_ADDRESS" is set to "169.254.1.100"
"AUTO_RTDB_BKUP_FILEPATH" is set to "/var/TKLC/elap/free/backup/"
"HTTP_ENABLED" is set to "No"
"ELAP_A_PRETTY_NAME" is set to "ELAP_A_NAME"
"AUTO_RTDB_BKUP_FILES_TO_MANTAIN" is set to "5"
"session_idle_timeout" is set to "10"
"ELAP_B_PROV_NETWORK_IP_ADDRESS" is set to "10.75.141.108"
"EXINIT_DEBUG_LEVEL" is set to "OFF"
"SNAPPER_ROLLBACK_INTERVAL" is set to "900"
"EBDAD_DEBUG_LEVEL" is set to "OFF"
"MAINT_DEBUG_NUM_LOGS" is set to "5"
"RIDB_LV_PATH" is set to "/dev/vgdrbd0"
"PROV_DEBUG_NUM_LOGS" is set to "5"
"LNPTRANS_LOG_DAYS" is set to "7"
"EXINIT_DEBUG_NUM_LOGS" is set to "5"
"ELAP_A_HTTP_PORT" is set to "80"
"EXINIT_ERROR_NUM_LOGS" is set to "5"
"logon_msg" is set to "NOTICE: This is a private computer system.  Unauthorized access or use may lead to prosecution."
"ELAP_B_HTTPS_PORT" is set to "443"
"ELAP_B_NAME" is set to "Floater-4"
"AUTO_RTDB_BKUP_TIME" is set to "6:00"
"EBDAD_GS_PORT" is set to "9692"
"LNP_LRN_QTY" is set to "150000"
"BACKUP_FILE_DIR" is set to "/var/TKLC/elap/free/backup"
"ELAP_LOGGING_EXPORT" is set to "DISABLED"
"AUTO_RTDB_BKUP_FREQUENCY" is set to "1"
"PROVISIONING_NETWORK_NETMASK" is set to "255.255.255.0"
"ELAP_LOGGING_REMOTE_SFTP_PATH" is set to ""
"ELAP_B_SYNCH_NETWORK_ADDRESS" is set to "169.254.1.200"
"ELAP_A_HTTPS_PORT" is set to "443"
"ELAP_A_DSM_MAIN_NETWORK_ADDRESS" is set to "192.168.120.100"
"ELAP_A_SUEXEC_HTTPS_PORT" is set to "8002"
"ELAP_A_GS_BANNER_PORT" is set to "8473"
"ELAP_B_DSM_BACKUP_NETWORK_ADDRESS" is set to "192.168.121.200"
"MAINT_DEBUG_LEVEL" is set to "OFF"
"DOWNLOAD_FILE_DIR" is set to "/var/TKLC/elap/free/backup"
"euidb_version" is set to "3"
"LNP_NPANXX_QTY" is set to "300000"
"LSMS_PROVISIONING" is set to "OFF" 
"ELAP_LOGGING_TIME_FORMAT" is set to "UTC"
"MAINT_ERROR_NUM_LOGS" is set to "5"
"UI_IP_AUTHORIZATION_ENABLED" is set to "FALSE"
"ELAP_LOGGING_REMOTE_IP_ADDRESS" is set to ""
"AUTO_RTDB_BKUP_DELETE_OPTION" is set to "y"
"HSOPD_ERROR_NUM_LOGS" is set to "5"
"TRPD_ERROR_NUM_LOGS" is set to "5"
"apache_403_error_message" is set to "NOTICE: This workstation is not authorized to access the GUI."
"EBDAD_ERROR_NUM_LOGS" is set to "5"
"max_account_inactivity" is set to "0"
"HSOPD_DEBUG_LEVEL" is set to "OFF"
"TRPD_DEBUG_NUM_LOGS" is set to "5"
"ELAP_LOGGING_REMOTE_PASSWORD" is set to ""
"ELAP_B_HTTP_PORT" is set to "80"
"MATE_MPS_HTTPS_PORT" is set to "443"
"EBDAD_DEBUG_NUM_LOGS" is set to "5"
"ELAP_B_PRETTY_NAME" is set to "ELAP_B_NAME"
"HSOPD_LSMS_PROVISIONING_PORT" is set to "7483"
"ELAP_RIDB_RELEASE" is set to "10.0.0"
"SNAPPER_LOG_LEVEL" is set to "4"
"AUTO_RTDB_BKUP_TYPE" is set to "local_mate"
"PROV_ERROR_NUM_LOGS" is set to "5"
"ELAP_A_PROV_NETWORK_IP_ADDRESS" is set to "10.75.141.107"
"CNF_QTY_THRESHOLD_PERC" is set to "90"
"MATE_MPS_HTTP_PORT" is set to "80"
"passwd_reuse_limit" is set to "12"
"apache_403_error_message_default" is set to "NOTICE: This workstation is not authorized to access the GUI."
"HTTPS_ENABLED" is set to "Yes"
"HSOPD_DEBUG_NUM_LOGS" is set to "5"
"ELAP_B_DSM_MAIN_NETWORK_ADDRESS" is set to "192.168.120.200"
"LOCAL_PROVISIONING_VIP" is set to "10.75.141.109"
"TRPD_DEBUG_LEVEL" is set to "OFF"
"RTDB_AUDIT" is set to "ON"
"LNP_TN_QTY" is set to "96000000"
"ELAP_B_GS_BANNER_PORT" is set to "8473"
"PROV_DEBUG_LEVEL" is set to "OFF"
"RELOAD_FLOW_CONTROL_TIME" is set to "200"
"passwd_complexity_checking" is set to "on"
"LNP_MR_QTY" is set to "2000000"
"RTDBA_NUM_LOGS" is set to "5"
"PROVISIONING_NETWORK_DEFAULT_ROUTER" is set to "10.75.141.1"
"RIDB_LV_NAME" is set to "lnpdb"
"ELAP_A_SUEXEC_HTTP_PORT" is set to "8001"
"ELAP_B_SUEXEC_HTTPS_PORT" is set to "8002"
"LNP_LRNMR_QTY" is set to "2000000"
"ELAP_LOGGING_ENHANCEMENTS_FEATURE" is set to "OFF"
"ELAP_A_DSM_BACKUP_NETWORK_ADDRESS" is set to "192.168.121.100"
"HSOPD_GS_PORT" is set to "9691"
"ELAP_B_SUEXEC_HTTP_PORT" is set to "8001"
"ELAP_B_DSM_LPBK_NETWORK_ADDRESS" is set to "192.168.123.200"
"max_failed_logins" is set to "3"
"BULK_DOWNLOAD" is set to "ON"
8. MPS X: Verify lnpdb logical volume.
$ su – admusr
$ Password:<admusr_password>
$ sudo lvs
  LV            VG      Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
lnpdb         vgdrbd0 owi-aos--k   2.50g
  mysql         vgdrbd0 -wi-ao---k   6.00g
  rollbacksnap  vgdrbd0 sri-a-s---   2.50g      lnpdb  0.00
  drbdmeta      vgroot  -wi-ao---- 128.00m
  elaproot      vgroot  -wi-ao----   4.00g
  free          vgroot  -wi-ao---- 196.97g
  logs          vgroot  -wi-ao----  40.00g
  plat_root     vgroot  -wi-ao----   1.00g
  plat_swap     vgroot  -wi-ao----   1.97g
  plat_tmp      vgroot  -wi-ao----   1.00g
  plat_usr      vgroot  -wi-ao----   4.00g
  plat_var      vgroot  -wi-ao----   1.00g
  plat_var_tklc vgroot  -wi-ao----   4.00g
$ exit
9. MPS X: Verify operational status of ELAP software.
$ service Elap status
~~ /etc/init.d/Elap status ~~
--------------------------
process hsopd is running.
process ebdad is running.
process maint is running.
process prov is running.
process trpd is running.
--------------------------
ELAP application is running
10. MPS X: Verify HA status
$ hastatus; ssh mate hastatus 
ACTIVE 
STANDBY
11. MPS X: Record cron file configuration
$ cat /etc/cron.d/TS.EXAP
#
# Task Scheduler cron file for EXAP
#
# WARNING: This file is automatically generated.  Do not manually edit it.
#
SHELL=/bin/bash
MAILTO=""
# BEGTYPE=ELAPLOGGING
# ID=LOGSRMCP, Action="/usr/TKLC/elap/bin/removeCompressLogs", Sched="daily,1,00:01"
01 00 * * * elapdev /usr/TKLC/elap/bin/removeCompressLogs
# ID=LOGSSFTP, Action="/usr/TKLC/elap/bin/transferLogsToRemote", Sched="hourly,1,00"
00 * * * * elapdev /usr/TKLC/elap/bin/transferLogsToRemote
# ENDTYPE
# BEGTYPE=AUTOBKPNOTCFD
# ID=1, Action="/usr/TKLC/elap/bin/raiseAlarmAutoBkpNotConfgd.pl", Sched="minutely,5"
*/5 * * * * elapdev /usr/TKLC/elap/bin/raiseAlarmAutoBkpNotConfgd.pl
# ENDTYPE
# BEGTYPE=AUTO_RTDB_BCKP
# ID=1, Action="/usr/TKLC/elap/bin/autoBackupRtdb.sh", Sched="daily,1,06:00"
00 06 * * * elapdev /usr/TKLC/elap/bin/autoBackupRtdb.sh
# ENDTYPE
# BEGTYPE=HTTPSDISABLE
# ID=1, Action="/usr/TKLC/elap/bin/raiseBnrMsgHttpsDisable.pl", Sched="hourly,12,00"
00 */12 * * * elapdev /usr/TKLC/elap/bin/raiseBnrMsgHttpsDisable.pl
# ENDTYPE
12. MPS X: Record /etc/passwd file
$ cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/sbin/nologin
daemon:x:2:2:daemon:/sbin:/sbin/nologin
adm:x:3:4:adm:/var/adm:/sbin/nologin
lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin
sync:x:5:0:sync:/sbin:/bin/sync
shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
mail:x:8:12:mail:/var/spool/mail:/sbin/nologin
uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin
operator:x:11:0:operator:/root:/sbin/nologin
games:x:12:100:games:/usr/games:/sbin/nologin
gopher:x:13:30:gopher:/var/gopher:/sbin/nologin
ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin
nobody:x:99:99:Nobody:/:/sbin/nologin
dbus:x:81:81:System message bus:/:/sbin/nologin
admusr:x:4996:4996:Platform remote admin user:/home/admusr:/bin/bash
rpc:x:32:32:Rpcbind Daemon:/var/cache/rpcbind:/sbin/nologin
nscd:x:28:28:NSCD Daemon:/:/sbin/nologin
vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin
apache:x:48:48:Apache:/var/www:/sbin/nologin
sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
ntp:x:38:38::/etc/ntp:/sbin/nologin
saslauth:x:499:76:Saslauthd user:/var/empty/saslauth:/sbin/nologin
postfix:x:89:89::/var/spool/postfix:/sbin/nologin
platcfg:x:5000:5000:Platform Configuration User:/home/platcfg:/usr/TKLC/plat/bin/platcfg
tpdProvd:x:5010:5010:TPD Provisioning Daemon:/home/tpdProvd:/usr/bin/false
syscheck:x:71:71:System Health Check User:/home/syscheck:/usr/TKLC/plat/bin/run_syscheck
hids:x:4995:4995:HIDS admin user:/home/hids:/sbin/nologin
dhcpd:x:177:177:DHCP server:/:/sbin/nologin
nslcd:x:65:55:LDAP Client User:/:/sbin/nologin
rtkit:x:498:450:RealtimeKit:/proc:/sbin/nologin
rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin
nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin
named:x:25:25:Named:/var/named:/sbin/nologin
tcpdump:x:72:72::/:/sbin/nologin
mysql:x:497:449:MySQL server:/var/TKLC/elap/db:/bin/bash
elapdev:x:3000:6001:elapdev user:/home/elapall:/bin/bash
elap:x:3006:6001:elap no login user:/home/elapall:/sbin/nologin
elapconfig:x:3002:6001:elapconfig user:/home/elapconfig:/home/elapconfig/runrunUI
appuser:x:3004:6002:appuser user for viewing log files from the GUI:/usr/TKLC/elap/logs:/bin/rbash
13. MPS X: Backup the EuiDB. $ sudo su - elapconfig
MPS X: Backup the EuiDB


MPS X: Backup the EuiDB 1

14. MPS X: Verify backups are being taken properly.
$ ls -ltrh /var/TKLC/appl/free/npdbBackup_ELAP21_20170719174539.tar
-rw-r----- 1 root root 220K Jul 19 12:05 /var/TKLC/appl/free/npdbBackup_ELAP21_20170719174539.tar
15. MPS X: Gather application log files. $ sudo savelogs –all Logs will be save in /var/TKLC/elap/free/ directory
$ ls -ltrh /var/TKLC/elap/free/
-rw-r----- 1 elapdev elap 2.6M Jul 18 17:13 /var/TKLC/elap/free/logsCapture_ELAP21_20170718171310.tar.bz2
16. MPS X: Gather system log files.
$ su – admusr
$ Password: <admusr_password>
$ sudo /usr/TKLC/plat/sbin/savelogs_plat
Logs will be saved in /tmp directory
/tmp/savelogs_plat.Natal-A.10689.tar.bz2
$ exit
17. MPS X: Verify RTDB status from GUI. From GUI select “RTDB->View RTDB status” Verify that RTDB status on ELAP is coherent which indicates that LSMS and ELAP are in sync.
RTDB status from the ELAP GUI

18. MPS X: Verify DMS DB levels matched and DB status is coherent on all STP cards From ELAP GUI banner, click on notepad icon beside EAGLE.
From ELAP GUI banner, click on notepad icon beside EAGLE.

19. MPS X: Verify DB status on DSM cards and that their provisioning system is taking updates. Login to EAGLE and run command:
rept-stat-db:display=all
Command Accepted - Processing
    eagle2 17-07-27 13:54:12 EST  EAGLE 46.6.0.0.0-71.5.0
    rept-stat-db:display=all
    Command entered at terminal #2.

    eagle2 17-07-27 13:53:49 EST  EAGLE 46.6.0.0.0-71.5.0
    eagle2 17-07-27 13:54:12 EST  EAGLE 46.6.0.0.0-71.5.0
    DATABASE STATUS: >> OK <<al #2.
            TDM 1114 ( STDBY)                 TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       54 17-07-24 12:43:00 EST  Y       54 17-07-24 12:43:00 EST
    FD CRNT Y      111                        Y      111
    GTT DB           4                                 4
            MCAP 1113                         MCAP 1115 0
            - --------                        - --------
    RD BKUP -    -         -        -         -    -         -        -        .
    USB BKP -    -         -        -         -    -         -        -
    NOTICE: This is a private computer system.
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    IPSG       1102  -  -      -           -        -          -
    CCS7ITU    1103  -  -      -           -        -          -
    EROUTE     1104  -  -      -           -        -          -
    IPS        1105  -  -      -           -        -          -
    OAM-RMV    1113  -  -      -           -        -          -
    TDM-CRNT   1114  Y  N  111         17-07-26 16:01:42       -
    TDM-BKUP   1114  Y  -  54          17-07-21 13:14:02  DIFF LEVEL
    OAM-RMV    1115  -  -      -           -        -          -
    OAM-USB    1115  -  -      -           -        -          -
    TDM-CRNT   1116  Y  N  111         17-07-26 16:01:42       -
    TDM-BKUP   1116  Y  -  54          17-07-21 13:14:02  DIFF LEVEL
    CCS7ITU    1201  Y  N  111         17-07-26 16:01:42       -
    ATMANSI    1202  -  -      -           -        -          -
    ATMITU     1203  -  -      -           -        -          -
    CCS7ITU    1204  Y  N  111         17-07-26 16:01:42       -
    CCS7ITU    1205  -  -      -           -        -          -
    CCS7ITU    1207  -  -      -           -        -          -
    ATMITU     1216  -  -      -           -        -          -
    VSCCP      1217  Y  N  111         17-07-26 16:01:42       -
                    ELAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  17-03-23 14:34:12          17        -
    RTDB-EAGLE          17-03-23 14:34:12          17        -
                    ELAP B ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  17-03-23 14:34:12          17        -
    RTDB-EAGLE          17-03-23 14:34:12          17        -
                    EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION    IN-SRVC
    ---------  ----  -  -----------------  ----------  ------------ -----------
    VSCCP      1217  Y  17-03-23 09:04:12          17        -       1d  1h 50m
20. MPS X: Verify alarms present on STP cards. Run following command on EAGLE to check alarms
rept-stat-alm
Command Accepted - Processing
    eagle2 17-07-27 13:55:19 EST  EAGLE 46.6.0.0.0-71.5.0
    rept-stat-alm
    Command entered at terminal #2.

    eagle2 17-07-27 13:55:20 EST  EAGLE 46.6.0.0.0-71.5.0
    ALARM  TRANSFER= RMC
    ALARM  MODE      CRIT= AUDIBLE     MAJR= AUDIBLE     MINR= AUDIBLE
    ALARM  FRAME 1     CRIT=  11         MAJR=  36         MINR=  19
    ALARM  FRAME 2     CRIT=   0         MAJR=   0         MINR=   0
    ALARM  FRAME 3     CRIT=   0         MAJR=   0         MINR=   0
    ALARM  FRAME 4     CRIT=   0         MAJR=   0         MINR=   0
    ALARM  FRAME 5     CRIT=   0         MAJR=   0         MINR=   0
    ALARM  FRAME 6     CRIT=   0         MAJR=   0         MINR=   0
    PERM. INH. ALARMS  CRIT=   0         MAJR=   0         MINR=   0
    TEMP. INH. ALARMS  CRIT=   0         MAJR=   0         MINR=   0
    TIMED INH. ALARMS  CRIT=   0         MAJR=   0         MINR=   0
    ACTIVE ALARMS      CRIT=  11         MAJR=  36         MINR=  19
    TOTAL ALARMS       CRIT=  11         MAJR=  36         MINR=  19
    Command Completed.