3.7.6 Procedure 17 START LSMS SERVICES

Table 3-22 Procedure 17 - Start LSMS services

S T EP # This procedure starts the LSMS services.Estimated time: 10 minutes

☐1.

MPS A: Log in to the server as the user “root”. 

Login: root
Password: <root_password>

☐2.

MPS A : Check hastatus

Run below command to check lsms status is UNINITIALIZED "INHIBITED" before running startNode:

# hastatus 
UNINITIALIZED

if status is UNINITIALIZED and not UNINITIALIZED "INHIBITED" run hafailover else continue with Step 3.

# /usr/TKLC/plat/sbin/hafailover --inhibit 
# hastatus
UNINITIALIZED "INHIBITED"

☐3.

MPS A:

Start lsmsmgr

 
# su - lsmsmgr

☐4.

MPS A: Start Node

This will make node active and start application

On the “Main Menu”, select Maintenance and press [ENTER].


Main Menu with Maintenance selected for node management.

Select Start Node and press [ENTER].


Maintenance Menu with Start Node selected.

Select Yes to confirm node startup press [Enter]


Start Node dialog with Yes selected to confirm startup.

Press Enter once the node is uninhibited successfully.


Terminal output confirming that the local node was uninhibited successfully.

Select Exit and press [Enter] to return to Main Menu.


Maintenance Menu with Exit selected after node startup.

Select Exit and press [Enter] to exit the lsmsmgr menu.


Main Menu with Exit selected after node startup.

☐5.

MPS A:

Switch to mate

 
#ssh mate

☐6.

MPS B: Log in to the server as the user “root”. 

Login: root
Password: <root_password>

☐7.

MPS B:

Start lsmsmgr

 
# su - lsmsmgr

☐8.

MPS B: Start Node

- This will make node standby and start application

On the “Main Menu”, select Maintenance and press [ENTER].


Main Menu with Maintenance selected for node management.

Select Start Node and press [ENTER].


Maintenance Menu with Start Node selected.

Select Yes to confirm node startup press [Enter]


Start Node dialog with Yes selected to confirm startup.

Press Enter once the node is uninhibited successfully.


Terminal output showing synchronization from the active mate and successful local-node startup.

Select Exit and press [Enter] to return to Main Menu.


Maintenance Menu with Exit selected after node startup.

Select Exit and press [Enter] to exit the lsmsmgr menu.


Main Menu with Exit selected after node startup.

Note: If the hastatus output shows UNINITIALIZED INHIBITED or UNINITIALIZED instead of STANDBY, run startNode again from the CLI. Then run hastatus to verify that the status has changed to STANDBY. 

[root@lsmssec ~]# startNode

This procedure is complete!