1.7 Switch Configuration

VLAN configuration on the switch is done based on the LSMS/NAS Segmented Type Configuration.

Note:

The VLAN IDs can be different based on the LAB network configuration.

==============================================================================
Name |VTag| Rout If | Tagged ports | Untagged ports
default |1 | sw0 | |1/1/1-1/1/24
vlan2 |2 | |1/1/3,1/1/4 |
vlan3 |3 | |1/1/3,1/1/4 |
naspri-network |5 | |1/1/3,1/1/4,1/1/17 |
nassec-network |6 | |1/1/3,1/1/4,1/1/18 |
elap-network |159 | |1/1/3,1/1/4,1/1/19 |
gui-network |161 | |1/1/3,1/1/4,1/1/20 |

Optionally assign some name to the switch ports:

interface 1/1/3
name LSMS-A_NAS/ELAP/GUI
!
interface 1/1/4
name LSMS-B_NAS/ELAP/GUI
!
interface 1/1/17
name LSMS-A_NAS-pri
!
interface 1/1/18
name LSMS-B_NAS-sec
!
interface 1/1/19
name ELAP-network-uplink
!
interface 1/1/20
name Gui-network-uplink