1. ACLI Reference Guide
  2. ACLI Configuration Elements A-M
  3. host-route

host-route

The host-route configuration element establishes routing exceptions on the Oracle Communications Session Border Controller for management traffic.

Parameters

dest-network
Enter the IP address of the destination network for this host route. No two host-route elements can have the same dest-network field value.
An IPV6 address is valid for this parameter.
netmask
Enter the destination network subnet mask. The network-interface element will not function properly unless this field value is valid.
An IPV6 address is valid for this parameter.
gateway
Enter the gateway used to leave the local network. The gateway field identifies the next hop to use when forwarding a packet out of the originator’s LAN.

Note:

The gateway entered must already be defined as a gateway for an existing network interface.
An IPV6 address is valid for this parameter.
description
Provide a brief description of this host-route configuration.

Path

host-route is an element under the system path. The full path from the topmost ACLI prompt is: configure terminal , and then system , and then host-route.

Note:

This is a multiple instance configuration element.