| June 2020 |
- Initial release
- Updates the maximum number of recorders in
"session-recording-group."
- Typo in ssh-key topic.
|
| July 2020 |
- Updates "system-config" to indicate that the
acp-tls-parameter is not RTC supported.
|
| September 2020 |
- Updates "access-control" to indicate that
this configuration object is not RTC supported.
- Updates "h323 > h323-stacks" with
parameters that are not RTC supported.
|
| September 2020 |
- Updates default key-size to be 2048.
- Adds test-sip-manipulation topic.
- Adds statement to "About This Guide" that
this document is for use with both Oracle Communications Session Border Controller and Oracle Enterprise Session Border
Controller.
|
| October 2020 |
- Updates the show-msrp-stats topic with a
Note to avoid resetting show-msrp-stats while calls are
running.
- ssh-config's new max value for
client-idle-timeout is 59.
- Removed authentication-over-ipsec from
authentication element.
|
| November 2020 |
- Updates for inclusive language.
- Adds limitation to acquire-config about
VLANs and IPv6.
- Adds enable-l2-miss-report to
system-config.
- Adds note to isup-param-rules.
|
| December 2020 |
- Adds retry-after-upon-offline and
reg-reject-response-upon-offline parameters to
sip-config.
|
| January 2021 |
- Removes references to /ramdrv.
- Warns against using /opt/logs for the
file-path attribute of account-config. Sets new default
to /opt/cdr.
- Adds the unsupported
account-group element.
- Adds detail to the
security-config,
local-cert-exp-trap-int
parameter.
|
| March 2021 |
- Corrects name of auth-attribute parameter
in the
session-agent
element.
- Updates
session-agent,
reuse-connections to include
the tls option.
|
| April 2021 |
- Adds content for S-Cz8.4.0p5.
- Adds the
run
configuration-assistant command.
|
| June 2021 |
- Corrects spelling typo - height
- Adds start-hold-timer-event parameter to
sip-config
- Updates sip-monitoring
- Clarifies that round-robin is the only
policy-group strategy
- Removes deprecated H323 show commands
- Removes reference to deprecated SRR
feature
- Updates reset command
|
| November 2021 |
- Corrects values for session-agent,
transport-method
- Updates for default value and range of
values for becoming-standby-time parameter in redundancy
section.
- Removes call-recording-server-id, xnq-state
and hairpin-id parameters from realm-config as SBC no
longer supports these parameters.
- Adds default value and range of values for
subscription-id-type parameter in realm-config
section.
- Replaces ext-policy-server with
ext-policy-svr in ACLI Configuration Elements
chapter.
- Updates for default value and range of
values for rtcp-muxi parameter in realm-config
section.
- Updates for default value for
tcp-keepalive-idle-timer parameter in network-parameters
section.
- Updates for default, min and max values for
tcp-keepalive-count parameter in network-parameters
section.
- Updates for default value and range of
values for media-type parameter in network-interface
section.
- Updates for tos-values parameter in
media-policy > tos-settings section.
- Updates for default value and range of
values for retarget-requests parameter in
local-routing-config section.
- Updates for file-name parameter in
local-routing-config section.
- Updates for default value of q850-cause
parameter in local-response-map > entries
section.
- Updates for default value of signaling-mtu
parameter in network-interface section
- Removes edit parameter from
local-response-map as SBC no longer supports this
parameter.
- Updates for default value of eloc-str-lkup
parameter in local-policy-attributes section.
- Updates for default value of https-state
parameter in http-server section.
- Updates for default value of state parameter
in http-client section.
- Updates for range of values for
cache-inactivity-timer parameter in enum-config
section.
- Updates for default value and range of
values for timeout parameter in enum-config
section.
- Adds new parameter trap-on-status-change in
dns-config section.
- Updates for default value of
extra-dnsalg-stats parameter in dns-config section.
- Updates for default, min and max values for
port in comm-monitor monitor-collector section.
- Updates for default value of dtmf-in-audiop
parameter in codec-policy section.
- Adds new parameter
evrc-tty-baudot-transcode in codec-policy section.
- Adds new parameter secure-dtmf-cancellation
in codec-policy section.
- Updates for range of values for
extended-key-usage-list parameter in certificate-record
section.
- Updates for range of values for
key-usage-list parameter in certificate-record
section.
- Updates for default value of
authentication-methods parameter in authentication >
tacacs-servers section.
- Updates for default value and range of
values of authentication-methods parameter in
radius-servers section.
- Updates for default value of
server-assigned-privilege parameter in authentication
section.
- Adds new parameter diameter-out-manip in
account-config account-servers section.
- Adds new parameter diameter-in-manip in
account-config account-servers section.
- Adds new parameter watchdog-ka-timer in
account-config account-servers section.
- Adds new parameter domain-name-suffix in
account-config account-servers section.
- Adds new parameter origin-realm in
account-config account-servers section.
- Updates for default and min values for
file-rotate-time parameter in account-config
section.
- Updates for mm-in-system parameter in
realm-config section.
- Updates of values for options in
network-parameters section.
- Updates of values for string-lookup in
local-routing-config section.
- Changes in local-error parameter as SIP
response defaults to “licensed-session-capacity-reached”
in local-response-map > entries section.
- Adds new parameter
verify-certificate-info-register in enforcement-profile
section.
- Adds note for submet-mask in
local-address-pool address-range section.
- Adds S-Cz8.4.0p8 content.
|
| February 2022 |
- Corrects the maximum value of
tcp-number-of-ports-per-flow to 4
- Clarifies that the standard maximum
character limit applies to the alternate-name and
local-policy parameters
- Corrects default value for
ping-all-addresses parameter in session-agent.
- Updates for default and range of values for
kpml-interworking parameter in session-agent
section.
- Renames kpmlRFC2833-iwf-on-hairpin to
kpml2833-iwf-on-hairpin in session-agent parameter and
updates for default and range of values.
- Updates for default and range of values for
ringback-trigger parameter in session-agent
section.
- Adds spl-options parameter in
session-agent.
- Adds sip-recursion-policy parameter in
session-agent-group.
- Adds force-parity parameter in
session-recording-server.
- Updates for default and range of values for
reject-message-window in session-router-config.
- Updates for default and range of values for
force-reinvite in session-timer-profile.
- Adds auto-realm-id, pac-method,
pac-interval,pac-strategy, pac-load-weight,
pac-session-weight,pac-route-weight,
pac-callid-lifetime, pac-user-lifetime parameters for
sip-config.
- Updates for default and range of values for
nsep-user-sessions-rate parameter in sip-config.
- Updates for default and range of values for
allow-pani-for-trusted-only parameter in
sip-config.
- Updates for default value for
sag-lookup-on-redirect parameter in sip-config.
- Adds default value and range of values for
create-dynamic-sa parameter in sip-config.
- Updates default value and range of values
for npli-upon-register parameter in sip-config.
- Updates default value and range of values
for cache-loc-info-expire parameter in sip-config.
- Adds default value and range of values for
retry-after-upon-offline parameter in sip-config.
- Updates bootparam parameters.
- Adds public-key as unsupported in ACLI
Configuration Elements N-Z.
- Updates default and range of values for
comm-monitor in system-config.
- Defines properly mps-volte parameter in
sip-config.
- Updates default value for allow-any
parameter in allowed-elements-profile.
- Updates default and range of values for
tls-version in tls-profile parameter.
- Adds allow-self-signed-cert parameter in
tls-profile.
- Removes inapplicable parameters from
tcp-media-profile.
- Removes inapplicable parameter from
tcp-media-profile > profile-entry.
- Renames tcp-media-profile >
tcp-media-profile-entry to tcp-media-profile >
profile-list.
- Adds msrp related parameters to
tcp-media-profile > profile-list.
- Adds default and range of values for
push-success-trap-state in system-config >
collect.
- Adds new values based on CPU alarms for
type parameter in system-config >
alarm-threshold.
- Adds new parameters - register-mode,
triggered-inactivity-interval and triggered-oos-response
in surrogate-agent.
- Updates default value for proto-neg-time in
ssh-config parameter.
- Adds spl-options in spl-config
- Renames view name to name,
included-sub-trees to included-list and
excluded-sub-trees to excluded-list in
snmp-view-entry.
- Renames group-name to name and sec-level to
security-level. Adds default value for security-level.
Removes sec-model. Adds mp-model and write-view
parameters in snmp-group-entry.
- Adds default value for default-v6-gateway.
Adds new parameters - http-timeout, pko-rake-pkt ,
pko-rake-burst, ecc-chk-pkt, forwarding-cores,
dos-cores, transcoding-cores in system-config.
- Adds default value for cleanup-time-of-day
in system-config..
- Adds telnet-timeout in system-config.
- Adds default value and range of values for
global-count in sip-recursion-policy.
- Corrects the default value for redirection
in sip-profile.
- Adds media-type in sip-manipulation >
mime-sdp-rules > sdp-media-rules.
- Corrects the values for action parameter and
adds definition of out-of-dialog msg-type in
sip-manipulation > mime-sdp-rules.
- Corrects the values for action parameter
and path for mime-header-rules in sip-manipulation >
mime-isup-rules > mime-header-rules.
- Adds content-type and format parameters,
corrects the values for action and changes mime-headers
to mime-header-rules in sip-manipulation >
mime-rules.
- Renames parameter-format to format,
parameter-type to type and corrects values for action in
sip-manipulation > mime-isup-rules >
isup-param-rules.
- Renames mime-headers to
mime-header-rules,corrects values for isup-spec and
action, adds out-of-dialog for msg-type in
sip-manipulation > mime-isup-rules.
- Adds values for action,comparison-type and
match-val-type in sip-manipulation > header-rules
> sip-element-rules.
- Removes duplicate entry of sdp-line-rules
element and updates action values in sip-manipulation
> mime-sdp-rules > sdp-session-rules >
sdp-line-rules.
- Adds new values for action and msg-type in
sip-manipulation > header-rules
- Adds atcf-icsi-match,service-tag and
spl-options parameters in sip-interface.
- Updates values for
hist-to-div-for-cause-380 in sip-interface.
- Updates 183-no-sdp value for
ringback-trigger parameter in sip-interface
- Updates ims-aka-feature as unsupported in
sip-interface.
- Updates default value for redirect-action
in sip-interface.
- Updates default value and range of values
for atcf-management-uri in sip-feature-caps.
- Updates default and range of values for
start-time, end-time and sample-interval in
system-config > collect > group-settings .
- Updates tacas-authorization-arg-mode as
unsupported in authentication > tacacs-servers.
- Adds options parameter in
phy-interface.
- Updates examples for included-list and
excluded-list in snmp-view-entry.
- Adds note about virtual platform in show
interfaces command.
- Updates system-config >
directory-cleanup as unsupported.
- Updates average-rate-limit as unsupported
in static-flow parameter.
|
| March 2022 |
- Adds RDs Terminated, CSs Terminated, and CSs
Not Established counters in show rec section.
- Updates lrt<filename> in synchronize
arguments.
- Updates dest-network, netmask and gateway
values and adds note about IPV4 in host-route
element.
- Adds clarification about Transport and
Secure parameter to 'show registration sipd by-user'
output.
- Removes obsolete information about
complexity requirements from the secret command.
- Added example of alternate-name.
- Adds local-port-match-max and
remote-port-match-max in ipsec >
security-policy.
- Adds audit-logging element.
|
| July 2022 |
- Updates 'show security' for TLS stats.
- Adds comment that add-index is not used in
translation-rules when the type is replace.
- Adds 840p12 IP Prefix feature.
|
| October 2022 |
- Adds the
"http-strict-transport-security-policy" parameter to the
"http-server" topic.
- Updates the "log-level" topic with tasks
you cannot set with the log-level command.
|
| November 2022 |
- Removes "surrogate-agent" option from
clear-cache registration sipd command.
|
| February 2023 |
- States limitations to ike-sainfo on virtual
platforms.
|