March 2022 |
|
May 2022 |
- Adds local-port-match-max and
remote-port-match-max in ipsec >
security-policy.
- Adds audit-logging element.
|
August 2022 |
- Adds 'show security tls stats' example for
session traffic
- Adds comment that add-index is not used when
the type attribute of a translation-rule is set to
replace.
- Adds reference conteint for
S-Cz9.1.0p2
- Adds the
http-strict-transport-security-policy parameter to the
"http-server" topic.
|
October 2022 |
- Updates the "log-level" topic with tasks you
cannot set with the log-level command.
- Clarifies that the reset command's auth and
radd statistic counters are applicable for RADIUS or
DIAMETER accounting.
- Adds New Features and updates for the
S-Cz9.1.0p3 software release.
|
December 2022 |
- Update packet-trace command to point to
Monitoring Warning topic.
- Removes "surrogate-agent" option from
clear-cache registration sipd command.
- Fixes minimum/maximum ranges on various
parameters.
|
February 2023 |
- Updates account-config for accuracy.
- Fixed security-policy priority attribute
range.
- Adds fax-continue-session to
sip-interface.
- States restrictions for ike-sainfo on
virtual platforms.
- Adds set-boot-file command.
|
May 2023 |
- Updates the valid values for the following
sip-interface parameters:
- invite-expire
- trans-expire
- registration-interval
- tcp-nat-interval
- nat-interval
- contact-mode
- Updates the valid values for the following
sip-config parameters:
- inactive-dynamic-conn
- invite-expire
- trans-expire
- max-timer
- init-timer
- Clarifies the effect on media release when
you set nat-traversal to always.
- Provides a use case for the
release-of-bearer signaling flow subscription setting on
an external policy server.
- Clarifies that wancom-health-score has no
effect on a phy-interface set to media.
- Clarifies the effect of
stop-sag-recurse.
- Updates the reset auth and reset radd
descriptions for accuracy.
- Corrects value to NMC treatment
parameter.
- Updates the DH availble in ike-config.
- Updated values of
session-max-life-limit.
- Corrects max values in
media-manager-config.
- Corrects max values in
network-parameters.
- Adds recommendation that the user does not
disable and re-enable an operational sip-interface with
TCP ports.
- Updates local-policy, activate-time and
deactivate-time parameters' acceptable syntax.
- Clarifies the use of default-2833-duration
and rfc2833-timestamp.
|
July 2023 |
- Adds 9 missing parameters to
media-manager-config.
- Updates the maximum value allowed for
account-config, intermediate-period.
- Fixes various typographical errors.
- Updates acceptable values for the following
dnsalg-constraints parameters:
- burst-rate-window
- max-sustain-rate
- max-inbound-sustain-rate
- max-outbound-sustain-rate
- sustain-rate-window
- max-latency
- time-to-resume
- max-burst-rate
- max-inbound-burst-rate
- max-outbound-burst-rate
- Adds the following parameters to the
certificate-record topic:
- key-algor
- digest-algor
- ecdsa-key-size
- cert-status-profile-list
- Adds the following parameters to the
cert-status-profile topic:
- trusted-cas
- crl-update-interval
- crl-list
- Adds CRL protocol option to the
cert-status-profile, type parameter.
- Adds the access-control,
nat-invalid-message-threshold parameter.
- Updates the accepted values for the
following access-control parameters:
- deny-period
- untrusted-signal-threshold
- maximum-signal-threshold
- invalid-signal-threshold
- average-rate-limit
- transport-protocol
- Updates the bfd-config, bfd-session,
hold-down-time parameter's description for clarity.
|
September 2023 |
- Adds msrp-kpi attribute to msrp-config
element.
- Adds values to standard-pkt-rate in
media-profile.
- Updates max value in police-rate in
media-profile.
- Adds clock-rate attribute to
media-profile.
- Updates max value for
tolerance-window.
- Lots of minor corrections.
- Corrects the disabled value for
operation-type parameter.
- Adds steering-pool allocation parameter at
S-Cz9.1.0p8.
|
November 2023 |
- Adds the sa-routes-traps parameter.
- Clarifies DynamicTCP and DynamicTLS
operation.
- Adds protocols to system-access-list.
- Corrects output for show MBCD and show MBCD
errors.
- Adds the httpclient-cache-size-multiplier
parameter at S-Cz9.1.0p9.
- Removes deprecated show algd command.
- Removes deprecated load image command.
- Updates the session-agent, allow-next-hop-lp
parameter to show it as unsupported.
|
February 2024 |
- Clarifies that network-interface is not RTC
supported.
- Adds dos-action-at-session parameter to
realm-config at S-Cz9.1.0p10.
- Adds http-clearDead-conn-timer parameter to
system-config at S-Cz9.1.0p10.
- Removed AP1100 restriction on management
interface VLANs.
|
April 2024 |
- Update values for eap-protocol.
- Updates the sti-server-group, straregy parameter to mark the least-busy
and prop-dist values as unsupported.
- Updates the sti-server, sti-attest description for
accuracy.
- Adds description to show arp's active-count argument.
|
June 2024 |
- Clarifies the impact of changing the add-icmp-ip and remove-icmp-ip
parameters on established calls.
- Corrects issue with package-logfiles command.
|
October 2024 |
- Adds clarification on the format for specifying IPv6 addressing in the
access-control element.
- Updates tls-global's session-caching parameter to note
that this parameter is not RTC supported.
- Updates the network-interface, gw-heartbeat's state
parameter default value for accuracy.
- Adds a note to the local-account command regarding the
resetting of passwords.
- Updates media-manager-config to indicate deprecated
parameters.
- Clarifies the UDP+TCP SA transport-method
parameter.
- Corrects ipsec, ipsec-global-config's red-ipsec-port
parameter's default and valid values.
- Removes erroneous references to the deprecated TSCF
feature.
- Removes ladder-diagram-rows parameter from sip-monitoring.
|