1. Platform Preparation and Installation Guide
  2. Oracle Server X9-2 Platform Preparation
  3. Connect ILOM to the Oracle Server X9-2

Connect ILOM to the Oracle Server X9-2

Use the following procedure to make a connection to the Oracle Server X9-2 Oracle Integrated Lights Out Manager (ILOM) port. For a remote permanent connection to the Service Processor over the ILOM connection, use the rear panel NET MGT port.

Note:

Keep Ethernet cables separated from power cables by at least 60mm where possible and never run them in the same channel of the rack without segregation.
  • Category 6 (or better) Ethernet
  1. Locate the cable to connect to the Oracle Server X9-2 for Communications.
  2. Plug the RJ-45 connector into the ILOM port.

    Figure 5-14 Connecting to ILOM over the Network

    This image displays the rear view of the Oracle Server X9-2 and labels the interfaces, per the image title.
  3. Lead the cable neatly away from the rear panel.
  4. Connect the other end of the cable to the LAN.
  • Refer to the Oracle Server X9-2 hardware documentation for information about how to configure the Web browser application to connect to the console, and how to establish communications with the Oracle Server X9-2.