Using the Trace Dialog Box

Understanding the Trace Dialog Box Toolbar

Toolbar Icon	Description
	The Trace button executes the trace.
	The Clear button erases the trace color from the Viewer and returns to normal color.
	The Refresh button performs the trace again. This is useful if assets have been operated or the model was rebuilt.
	The Trace Focus button focuses the Viewer on the entire extent of the trace.
	The Endpoint button focuses the Viewer on the endpoint asset of the trace. This option is disabled if the trace is in all directions (since there will not be a single endpoint).
	The Help button displays online help for the Trace function.

Understanding the Trace Details Pane

To display the Trace dialog box, click the Trace button on the Viewer toolbar and select an object. The Trace dialog box displays the following fields and buttons:

• The first drop-down list allows you to select the trace type, as described in the Trace Type table above.

• The second drop-down list allows you to select the trace direction:

• Upstream: Constrains the trace to be only upstream of the selected asset.

• Downstream: Constrains the trace to be only downstream of the selected asset.

• All: Allows the trace to be both downstream and upstream of the selected asset.

Note: Tracing all connected assets will automatically trace both upstream and downstream. Tracing to source will automatically trace upstream.

• The third drop-down list allows you to select the trace mode:

• Current Session: Performs the trace by using statuses currently displayed in the Viewer. This is the default.

• Nominal: Performs the trace by assuming nominal statuses for all assets.

• The fourth drop‑down list allows you to select what devices to display in the Trace Results dialog box table:

• No Table: The Trace Results dialog box is not displayed.

• Protective Devices: The Trace Result dialog box shows devices and fuses along the trace.

• Switches: The Trace Result dialog box shows all switches along the trace.

• Device Class: Allows you to open the Select Class dialog box to choose one or more classes to show in the Trace Results dialog box; see Using the Select Class Dialog Box for details.

• All Devices: All devices along the trace will be shown in the Trace Results dialog box.

Advanced Trace Dialog Box Fields

Click the Advanced (Expand) button in the bottom-right corner of the Trace dialog box to display additional information about the selected object, including detailed topology. You can also inspect direct connections and navigate to connected objects.

When you click the Advanced button, the Trace dialog box expands to display the following information.

The Asset Details section displays the following asset information:

• Asset type

• Asset handle

• Network Component Group (NCG)

• Map containing the asset

• Display group

The Symbol Details section displays the following symbol information:

• Symbology class

• Symbol ID

• Coloring status

• Valid statuses

• Coloring rule

• Symbol coordinates

The Connectivity Details section displays the following connection information:

• Pressure Zones

• Current statuses

• Nominal statuses

• Other statuses

The Connections section displays a list of connected nodes for the selected object. You can expand the list of connections for each node and focus the Viewer on an object in the list. For more information, see “Inspecting Direct Connections and Navigating to Connected Objects”.