5.5 Configure the OFSAAI_InstallConfig.xml File
To configure the OFS_InstallConfig.xml file, follow these steps:
- Navigate to the OFS_AAAI_PACK/OFS_AAI/conf/ directory.
- Open the OFSAAI_InstallConfig.xml file in a text editor.
- Configure the OFSAAI_InstallConfig.xml file as mentioned in the following table.
You must manually set the InteractionVariable parameter values as mentioned in the table. If a value is not applicable, enter NA. Ensure that the value is not entered as NULL.
Table 5-4 Table 19: OFSAA Infrastructure Installation Tasks and Descriptions
InteractionVariable Name | Significance and Expected Value | Mandatory |
---|---|---|
<Layer name="GENERAL"> | ||
InteractionGroup name=”WebServerType” | ||
WEBAPPSERVERTYPE |
Identifies the web application server on which the OFSAA Infrastructure web components are deployed. Set the following numeric value depending on the type of web application server:
For example,
|
Yes |
InteractionGroup name=”OFSAA Infrastructure Server Details” | ||
DBSERVER_IP |
Identifies the host name or IP address of the system on which the Database Engine is hosted. Note: For RAC Database, the value must be NA. For example,<InteractionVariable name="DBSERVER_
IP">14.15.16.17</InteractionVariable> or
|
Yes |
InteractionGroup name=”Database Details” | ||
ORACLE_SID/SERVICE_NAME |
Identifies the Oracle DB Instance SID or
Note: The Oracle_SID value must be exactly the same as it is mentioned inJDBC_URL .
For example, |
Yes |
ABS_DRIVER_PATH |
Identifies the directory where the JDBC driver
(ojdbc<version>.jar) exists. This is typically the
For example, Note: See Hardware and Software Requirements to identify the correct ojdbc<version>.jar file version to be copied. |
Yes |
InteractionGroup name=”OLAP Detail | ||
OLAP_SERVER_ IMPLEMENTATION |
Identifies whether the OFSAA Infrastructure OLAP component must be configured. It depends on whether you intend to use the OLAP feature. The following numeric value must be set depending on the choice:
Note: If the value forOLAP_SERVER_IMPLEMENTATION is
set to 1, the installer checks if the following environment
variables are set in the .profile file:
|
No |
InteractionGroup name=”SFTP Details” | ||
SFTP_ENABLE |
Identifies if the SFTP (Secure File Transfer Protocol) feature is to be enabled. The following numeric value must be set depending on the choice:
|
Yes |
Note: The default value forSFTP_ENABLE is 1,
which signifies that SFTP is used. Oracle recommends using SFTP
instead of FTP because SFTP is more secure. However, you can ignore
this recommendation and use FTP by setting
SFTP_ENABLE to 0. You can change this
selection later from the OFSAAI administration interface.
Set |
||
FILE_TRANSFER_PORT |
Identifies the port used for the file transfer service. The default
value specified is 22 (SFTP). Specify the value as 21
or any other PORT value if the value for
For example, |
Yes |
InteractionGroup name=”Locale Detail” | ||
LOCALE |
Identifies the locale information to be used during the installation. This release of the OFSAA Infrastructure supports only US English. For example, |
Yes |
InteractionGroup name=”OFSAA Infrastructure Communicating ports" Note: The following ports are used internally by the various OFSAA Infrastructure services. The default values mentioned are set in the installation. If you intend to specify a different value, update the parameter value accordingly, ensure that the port value is in the range 1025 to 65535, and the respective port is enabled. |
||
JAVAPORT | 9999 | Yes |
NATIVEPORT | 6666 | Yes |
AGENTPORT | 6510 | Yes |
ICCPORT | 6507 | Yes |
ICCNATIVEPORT | 6509 | Yes |
OLAPPORT | 10101 | Yes |
MSGPORT | 6501 | Yes |
ROUTERPORT | 6500 | Yes |
AMPORT | 6505 | Yes |
InteractionGroup name="Web Details" Note: If the value for |
||
HTTPS_ENABLE |
Identifies whether the UI must be accessed using HTTP or HTTPS scheme. The default value is set to 0. The numeric value must be set depending on the following options:
For example, |
Yes |
WEB_SERVER_IP |
Identifies the HTTP Server IP/ Host name or Web application server IP/ Host name, to be used to access the UI. This IP is typically the HTTP Server IP. If a separate HTTP Server is not available, then the value must be Web application server IP/Host name. For example, or
|
No |
WEB_SERVER_PORT |
Identifies the Web Server Port, which is typically 80 for non SSL and 443 for SSL. If a separate HTTP Server exists, the port value must be the value configured for the Web Server. Warning: The installer will not accept the port value as:
For example, |
No |
CONTEXT_NAME |
Identifies the web application context name which is used to build the URL to access the OFSAA application. You can identify the context name from the following URL format:
The following is an example:
For example, |
Yes |
WEBAPP_CONTEXT_PATH |
Identifies the absolute path of the exploded EAR file on the web application server.
Note: For WebLogic, the value specified for this attribute is ignored and the value provided against the attributeWEBLOGIC_DOMAIN_HOME is considered.
|
Yes |
WEB_LOCAL_PATH |
Identifies the absolute path to any directory on the web application server that can hold temporary files, which are uploaded as part of the usage of the application. Set this in the FTPSHARE location. Note: During a clustered deployment, ensure that this path and the directory are the same on all the nodes. |
Yes |
InteractionGroup name="Weblogic Setup Details” | ||
WEBLOGIC_DOMAIN_HOME |
Identifies the WebLogic Domain Home. For example, |
Yes. Specify the value only if WEBAPPSERVERTYPE is set as 3 (WebLogic) |
InteractionGroup name="OFSAAI FTP Details” | ||
OFSAAI_FTPSHARE_PATH |
Identifies the absolute path of the directory that is identified as the file system stage area. Note: The directory must exist on the same system on which the OFSAA Infrastructure is being installed (can be on a separate mount).The user mentioned in the APP_SFTP_USER_ID parameter in the following example must have RWX permission on the directory. For example, |
Yes |
OFSAAI_SFTP_USER_ID | Identifies the user who has RWX permissions on the directory
identified for the parameter APP_FTPSHARE_PATH .
|
Yes |
OFSAAI_SFTP_PRIVATE_KEY |
Identifies the SFTP private key for OFSAAI. For example,
By default, the value is NA, which indicates that, for authentication, you are prompted to enter the password for the user <OFSAAI_SFTP_USER_ ID>. For more information on how to generate an SFTP Private key, see the Set Up SFTP Private Key section. |
No |
OFSAAI_SFTP_PASSPHRASE |
Identifies the passphrase for the SFTP private key for OFSAAI. For example,
By default, the value is NA. If the |
No |
InteractionGroup name="Hive Details" The default value set for the interaction variables under this group is NA. Note: The following values are required only for Hive Configuration. |
||
HIVE_SERVER_PORT |
Identifies the port used for the file transfer service. The default value is 22 (SFTP). To use this port for FTP, set this value to 21. For example,
|
Yes |
HIVE_SERVER_FTPDRIVE |
Identifies the absolute path to the directory identified as file system stage area of the HIVE server. For example,
|
Yes |
HIVE_SERVER_FTP_USERID |
Identifies the user who has RWX permissions on the directory
identified under the parameter
|
Yes |
HIVE_SERVER_FTP_PROTOCOL |
If the For example,
|
Yes |
HIVE_SFTP_PRIVATE_KEY |
Identifies the SFTP private key for the HIVE server. For example,
By default, the value is NA, which indicates that, for
authentication, you are prompted to enter the password for the user
For more information on generating SFTP Private key, see the Set Up SFTP Private Key section. |
|
HIVE_SFTP_PASSPHRASE |
Identifies the passphrase for the SFTP private key for HIVE. For example,
By default, the value is NA. If the |