Pre-Configuration Requirements for the Microsoft Windows 7 Wireless PCWS 2015

This section explains the steps necessary to connect a Microsoft Windows 7 Wireless PCWS 2015 for PCI compliance. When configuring, use the highest encryption level available to the device. It is recommended that the PCWS 2015 always be used at a minimum of WPA2-AES.

Before you can connect the Microsoft Windows 7 Wireless PCWS 2015 to a wireless network, make sure to:

1. Read the PCI DSS Wireless Guideline Informational Supplement version 2.0.

2. Verify that the PCWS 2015 has minimum CAL version 3.1.3.115 installed. If CAL needs to be updated, contact your Oracle MICROS representative.

3. Verify that the Mini-PCI Wireless Card was installed on the PCWS 2015. This must be installed before connecting the Wireless PCWS 2015 to a wireless network. If you need to request this part, reference the following part number (PN) and description:

   • PN: 400633-225-PT

   • Description: SparkLAN WMIR-200N; WIRELESS (802.11a/b/g/n) UPGRADE KIT WS5/WS5A/PCWS2015, INCLUDES MINI-PCI CARD,ANTENNAS, AND INSTALLATION INSTRUCTIONS.

     Note that this card is capable of using WPA2 encryption with AES. Its configuration is PCI compliant when using WPA2 encryption and placed behind a Firewall.

   For installation instructions, contact your Oracle MICROS representative.

4. Ensure that your site has a WPA2-AES compatible Access Point.

5. If using PEAP, have an Authentication device (for example, IAS Server or the WS2000).

6. Have a USB keyboard for the workstation.