Installing the Handle with Bump Bar Mounting Bracket

The Handle with Oracle MICROS Bump Bar Mounting Bracket for Oracle MICROS Express Station 4 Series is an optional product. Contact your Oracle MICROS representative for more information.

Installing the Handle with Bump Bar Mounting Bracket and the 20-Key Bump Bar

1. Attach the 20-key bump bar silver mounting plate to the handle. Note: The silver plate is included in the box with the 20-key bump bar.
   
   
   
2. Place the 20-key bump bar into the plate by inserting the two grooves on the side of the plate into the slots on the bump bar, and then tighten the security screw.
   
   
   
3. Attach the full bracket assembly to the back of the Express Station. Note: For wired bump bars, use the posts on the back of the bracket assembly for cable management.
   
   
   

Installing the Handle with Bump Bar Mounting Bracket and the 10-Key Bump Bar

1. Attach the black adapter plate to the handle.

   
   
   

2. Attach the 10-key bump bar silver mounting plate to the black adapter plate. Note: The silver plate is included in the box with the 10-key bump bar.

   
   
   

3. Place the 10-key bump bar into the plate by inserting the two grooves on the side of the plate into the slots on the bump bar, and then tighten the security screw.

   
   
   

4. Attach the full bracket assembly to the back of the Express Station. Note: For wired bump bars, use the posts on the back of the bracket assembly for cable management.