1. Setup Guide
  2. Safety and Handling
  3. Care and Handling

Care and Handling

Equipment Placement

  • Keep the Workstation 8 Series within an operating temperature between 0C (32F) and 50C (122F).

  • If you are placing your equipment in an area adjacent to carpeting, use an anti-static grade of carpeting. If you do not have anti-static carpeting, use static discharge mats.

  • Do not place equipment near food preparation areas, glass racks, or water stations. Although the Workstation 8 Series is highly spill resistant, take care to avoid using electrical equipment near water.

  • Take precautions to prevent the accidental dropping of metallic objects such as paper clips and staples into the equipment.

Electromagnetic Interference

  • Do not run exposed cables in the vicinity of AC power lines because the noise radiating from the AC power lines can be absorbed by Workstation 8 AC power and communication lines.

  • Keep devices that emit RF energy, such as cordless phones, at least eight inches from the equipment or cable during operation.

Cleaning the Workstation 8

Use a damp lint-free cloth to clean the Workstation 8. A clean lint free cloth dampened with a 50/50 mix of isopropyl alcohol and water can be used as needed. Do not use products containing bleach, hydrogen peroxide, ammonia or abrasives.

  • Use only a soft, lint-free cloth. Avoid abrasive cloths, towels, paper towels, or similar items.

  • Avoid excessive wiping, which might cause damage.

  • Don't get moisture into any openings.

  • Don't spray cleaners directly onto the item.