1. Setup Guide
  2. BIOS Configuration
  3. Starting the BIOS System Configuration Utility

Starting the BIOS System Configuration Utility

To configure the BIOS, start the BIOS System Configuration Utility using the following steps:

  1. With keyboard: Connect a USB keyboard to the Workstation 820 USB (CFD) port (adapter required) or an available USB port on the Peripheral Expansion Module.
  2. Power on or restart the workstation.
  3. When the message Press <F2> to enter setup appears at the bottom of the screen, press F2 or tap the lower left or lower right third of the bootup screen to enter the BIOS Configuration Utility.