Epson Printer Setup for IDN Module
Setup the module DIP switches as follows:
Table 32-6 Printer ID
DEVICE # | DS1 | DS2 | DS3 | DS4 |
---|---|---|---|---|
01 |
- |
- |
- |
ON* |
02 |
- |
- |
ON |
- |
03 |
- |
- |
ON |
ON |
04 |
- |
ON |
- |
- |
05 |
- |
ON |
- |
ON |
06 |
- |
ON |
ON |
- |
07 |
- |
ON |
ON |
ON |
08 |
ON |
- |
- |
- |
09 |
ON |
- |
- |
ON |
10 |
ON |
- |
ON |
- |
11 |
ON |
- |
ON |
ON |
12 |
ON |
ON |
- |
- |
13 |
ON |
ON |
- |
ON |
14 |
ON |
ON |
ON |
- |
15 |
ON |
ON |
ON |
ON |
Table 32-7 Baud Rate
BAUD RATE | DS5 | DS6 |
---|---|---|
9600 |
-* |
-* |
19200 |
ON |
- |
38400 |
- |
ON |
*Factory Default
Figure 32-2 Back of Printer and Module Faceplate
Set the annunciator to OFF by doing the following:
-
Make sure the printer is off.
-
Set the switches to the necessary parameters.
-
Turn the printer on. The Status sheet should subsequently print.
-
Turn the printer off. Set IDN switches back to their default setting.