Parameters

This section describes the Parameters available in the Housekeeping module. They, are accessible from the Administration module under System Setup, Parameter.

Table 12-7 PAR Group Safety

PAR Name PAR Value Description

Enable Ferry Operation

0 or 1

0 - Disable Ferry Specify Operation.

1 - Ferry Specify Operation.

Table 12-8 PAR Group General

PAR Name PAR Value Description

Alter Cabin Status

0 or 1

0 - Disable cabin status changes for any updates of cabin clean status

1 - Enable cabin status changes for any updates of cabin clean status.

Note: This parameter must be enabled so that the cabin status is updated whenever someone checks in/out or is moved to another cabin. This is the pre requisite for tasks to be created in Housekeeping.

Table 12-9 PAR Group Housekeeping

PAR Name PAR Value Description

Bypass Change of Cabin Clean State Upon Check-Out

0/1

0-Do not bypass, 1-Bypass

To control the change of cabin clean state upon guest check-out

Enable Auto Alert Message upon Guest Cabin Change

0/1

0-Disable auto alert, 1-Enable auto alert

To create an alert message for the housekeepers when a guest changes Cabin

Enable Auto Alert Message upon Guest Check-In

0/1

0-Disable auto alert, 1-Enable auto alert

To create an alert message for the housekeepers when a guest checks-in

Housekeeping Positions

For example, 010

Stores all the OPO_ID for housekeeping crew

Minimum number of days onboard for Linen Change

For example, 8

Minimum number of stays onboard before a linen change is required for the cabin

Overnight Rush Cabin Before Midnight Hours

For example, 18

If par value is 6, then the system will consider cabins as rush cabins when it has guests checking-out 6 hours before midnight.

Overnight Rush Cabin Extended Hours

For example, 8

If par value is 8, then the system will cover rush cabins up until the 8th hour after midnight.

Validate Cabin Clean Status before Update

0/1

Do not allow to update to cabin clean status to VC/VD if cabin is occupied.

X day Before Check-Out To Skip Linen Change

For example, 3

X day to skip linen change just before the expected checkout date.

If checkout date is on 15th and par value=2, then skip any linen changes on 13th & 14th.

X day to Change Linen

For example, 4

X day to change linen after check-in. If check-in date is on the 1st and par value=3, then linen change is done on the 4th.