Web Configuration Parameters
This chapter describes configuration parameters and applet parameters.
These notes apply to the following table.
- Required: A parameter is required if Forms requires a non-null value (from
formsweb.cfg
or, where allowed, from the URL) in order to function correctly. - Valid values: In a few cases, these are listed explicitly, but in most cases they can be inferred from the description. If the description implies that the value is Boolean (for example, "Specifies whether"), the valid values are TRUE or FALSE (case-insensitive), except for runform parameters (see following table), in which case the valid values are YES, Y, ON, or NO, N, OFF (case-insensitive). Numeric values should be integers specified as decimal numbers, unless indicated otherwise. The elements in lists of files or directories should be separated by ':' [Unix] or ';' [Windows] unless indicated otherwise.
- Default: For required parameters, the parameter description lists the default value from the default section of the
formsweb.cfg
that is shipped with the product (or at least indicates that it specifies an appropriate value). For optional parameters, the parameter description may show a non-null default value from the default section of theformsweb.cfg
that is shipped with the product. In addition, the parameter description may show the default value that is assumed if no value is specified. (This is the non-null value that produces the same behavior as an unspecified or null value). When the description for an optional parameter simply shows an unqualified default value, the implication is that this value is both the default value from the default section of theformsweb.cfg
that is shipped with the product, and also the default value that is assumed if no value is specified. When the description for an optional parameter does not explicitly specify a default value, the implication is that the default value is null. - Application system parameters: The descriptions for some configuration parameters indicate that they are application system parameters. Such a parameter applies to an application that has been launched via a URL. Its value is taken from the default config section or from the config section specified by the
config
parameter in the URL. A value specified for an application system parameter in the URL is ignored. - Global system parameters: The descriptions for some configuration parameters indicate that they are global system parameters. Such a parameter applies to the installation as a whole. Its value is taken from specific config section(s); the exact semantics are spelled out in the description of the parameter.
- Application user parameters: If a configuration parameter is not described as an application system parameter or a global system parameter, the implication is that it is an application user parameter. Such parameters are similar to application system parameters, but a value taken from a config section may be overridden by a value specified for the parameter in the URL.
- Runform parameters: The descriptions for some parameters indicate that they are runform parameters. They are passed to the
frmweb
process using theserverArgs
config or applet parameter. For such a parameter, when specifying a value that contains special characters, follow the syntax rules listed in Specifying Special Characters in Values of Runform Parameters. - Sub-arguments for otherparams: The descriptions for some parameters indicate that they are sub-arguments for otherparams. That means that in order for the parameter to take effect (when specified in
formsweb.cfg
or the URL), it must appear in the formname=%name%
within the value of theotherparams
parameter. So, for example, if you are adding thearray
parameter (with a value ofno
) to a configuration section, you must also addarray=%array%
to the value of theotherparams
parameter. Notice that these parameters are all runform parameters (because theotherparams
parameter is itself a runform parameter), and so when specifying a value that contains special characters adhere to the syntax rules described in Specifying Special Characters in Values of Runform Parameters. These parameters are treated as application system parameters if theotherparams
parameter is specified in therestrictedURLparams
parameter.
The value specified for Category is one of 11 possible values.
- The value for a preconfigured configuration parameter is one of the 7 values in the Show list in the Enterprise Manager Web Configuration page. These are
basic
,sso
,trace
,plugin
,html
,applet
, andadvanced
. - A value of
add-on
indicates a configuration parameter that's not preconfigured. Such a parameter can be added to a configuration section as described in Managing Parameters. Once added, the Enterprise Manager Web Configuration page will show the parameter asadvanced
. - Values of
applet add-on
andsso add-on
are similar toadd-on
, but the Enterprise Manager Web Configuration page will show the parameter asapplet
orsso
if it's added to a configuration section. - A value of
add-on applet param
indicates a parameter which can be added to applet definition template files that you have created by modifying the templates provided by Oracle, as described in Creating Your Own Applet Definition Template Files. For added flexibility (for example, if you wish to allow end users to specify the value in the URL), the applet parameter can specify that its value is the value of a configuration parameter (typically of the same name). Such a parameter can be added to a configuration section as described in Managing Parameters. When added, the Enterprise Manager Web Configuration page will show the parameter asadvanced
.
Table -61 Web Configuration Parameters
Parameter | Category | Description |
---|---|---|
allowAlertClipboard |
advanced |
Specifies whether an alert dialog should be presented if the system clipboard is inaccessible. Specifying FALSE will cause failed access to the clipboard to be reported on the Java Console. Default: |
allowLservletDebug |
add-on |
Specifies whether to allow debug messages (and other messages with log level less than NOTIFICATION) to be written from the Listener Servlet Default: Note: In a case where the Listener Servlet was not launched from the Forms Servlet (for example, by submitting static HTML or entering a/forms/lservlet URL in a browser), the allowLservletDebug lservlet initialization parameter specifies whether to allow debug messages to be written from the Listener Servlet to the Oracle Diagnostic Log.
This parameter is an application system parameter. |
allowNewConnections |
advanced |
Specifies whether new Forms sessions are allowed. Default: This parameter is a global system parameter. It must be specified in the default config section of |
allow_debug |
advanced |
A value of TRUE or TESTMODE allows debug messages (and other messages with log level less than NOTIFICATION) to be written from the Forms Servlet ( Default: Note: Even when TRUE or TESTMODE is specified, certain debug messages produced before the Forms Servlet has read theallow_debug parameter will be suppressed. To see these messages (in addition to other debug messages), specify a value of TRUE or YES for the testMode frmservlet initialization parameter. This will override any value that was specified (or defaulted) for the allow_debug configuration parameter.
This parameter is an application system parameter. |
alwaysOnTop |
applet add-on
|
Specifies whether the Forms separate frame will remain on top of all other open windows. When used with Default: |
applet_name |
advanced |
Configuration for JavaScript integration. This is name of the Forms applet that users can use to refer to it from a JavaScript code. |
archive |
plugin |
Comma-separated list of archive files that are used or downloaded to the client. For each file, include the file name if the file is in the codebase directory, or include the virtual path and file name. Required. Default from |
array |
add-on |
Set this parameter to Default: This parameter is a sub-argument for otherparams. |
background |
applet |
Specifies the image file that should appear in the background of the main applet window. Specify NO for no background. Leave empty to use the default background. Supported image formats are: gif, png, and jpg. |
baseHTML |
html |
Specifies the applet definition template file to be used for an application that's not Web Start or Standalone, if the client browser is not on Microsoft Windows or does not support the Required. Default from This parameter is an application system parameter. |
baseHTMLjpi |
html |
Specifies the applet definition template file to be used for an application that's not Web Start or Standalone, if the client browser is on Microsoft Windows and supports the Required. Default from This parameter is an application system parameter. |
basejnlp |
html
|
Specifies the applet definition template file to be used for a Web Start application or an embedded JNLP file. The file can be specified as a full path, or as the name of a file within Required. Default from This parameter is an application system parameter. |
baseSAAfile |
html |
Specifies the applet definition template file to be used for a Standalone application. The file can be specified as a full path, or as the name of a file within Required. Default from This parameter is an application system parameter. |
centerOnStartup |
applet add-on |
Specifies whether the Forms separate frame will start centered on the screen. When used with Default: |
clientDPI |
add-on |
Dots per inch (DPI). Overrides the DPI setting returned by the JVM, allowing you to manage varying DPI settings per platform. Oracle recommends that you use an integer between 50 and 200. |
codebase
|
plugin |
The virtual directory you define to point to the physical directory Required. Default from |
colorScheme
|
applet |
Specifies the application's color scheme. Valid values [case-insensitive]: Default from Note: colorScheme is ignored if LookAndFeel is set to Generic.
|
connectionDisallowedURL
|
add-on |
The URL to which Forms Servlet requests are redirected when connections to new Forms sessions are disallowed. This parameter is an application system parameter. |
consoleUseRegistryFont
|
add-on applet param |
Specifies whether the application's console (or message bar) uses the default font attributes specified in Font and Icon Mapping (Registry.dat ).
|
cursorBlinkRate
|
add-on applet param |
The duration (in milliseconds) that the cursor is visible during a blink cycle. This is also the duration that the cursor is invisible. A value of Default: |
customColorScheme
|
advanced |
The name of the custom colorscheme created in Registry.dat . Setting this will override the colorscheme parameter.
|
debug
|
trace |
Allows running in debug mode. Default: This parameter is a runform parameter. |
debug_messages
|
add-on |
Set this parameter to Default: This parameter is a sub-argument for otherparams. |
defaultcharset
|
add-on |
The character set to be used in servlet requests and responses. Defaults to ISO-8859-1 (also known as Latin-1). Ignored if the servlet request specifies a character set (for example, in the content-type header of a POST). The values of this parameter may be specified either as an IANA character set name (for example, SHIFT_JIS) or as an Oracle character set name (for example, JA16SJIS). It should match the character set specified in the NLS_LANG environment variable, and it should also be a character set that the browser can display. Also, if the browser allows multibyte characters to be entered directly into a URL, for example, using the IME, as opposed to URL escape sequences, and if end users should be allowed to do this, then the value of this parameter should match the character set that the browser uses to convert the entered characters into byte sequences. Note: If your configuration file contains configuration sections with names that contain characters other than 7-bit ASCII characters, then the following rules apply. If a config parameter is specified in a URL or in the body of a POST request with no specified character set, and the value contains non-7-bit ASCII characters, then the value is interpreted using a character set named in thedefaultcharset parameter. However, only the language-dependent default section and the language-independent default section of the configuration file is searched for the defaultcharset parameter. No other configuration section is searched because the name is not yet known.
This parameter is an application system parameter. |
digitSubstitution
|
advanced |
Specifies the shape of decimal digits in BIDI environments. Valid values [case-insensitive]:
Default: |
disableMDIScrollbars
|
add-on |
Specifies whether to disable horizontal and vertical scroll bars in the Forms main applet window. Default: |
disableValidateClipboard
|
advanced |
Specifies whether to disable validation of the clipboard when focus moves. This may improve performance. However, the PASTE menu bar icon will be enabled whenever the item that now has focus is editable, even if it an attempt to paste into it would fail. Default: |
dynamicLayout
|
add-on applet param |
Specifies whether the Forms applet should redraw the parent window (and notify the server) while resizing the window. Enabling causes an increase of network traffic while resizing is in progress. Default: |
enableJavaScriptEvent
|
advanced |
Specifies whether JavaScript events can be raised on the client, and whether the Default: |
EndUserMonitoringEnabled
|
trace |
Specifies whether End User Monitoring integration is enabled. Default: |
EndUserMonitoringURL |
trace |
Specifies where to record End User Monitoring data. |
envFile
|
basic |
The name of the environment configuration file. Required. Default from This parameter is an application system parameter. |
escapeparams
|
advanced |
If set to FALSE, runform will treat special characters in runform parameters as it did in releases earlier than 9.0.4. This parameter has no effect unless it is the first sub-argument of the Default from Default if unspecified: This parameter is an application system parameter. |
form
|
basic |
The name of the top level (initial) Forms module (fmx file) to run. Required. Default from This parameter is a runform parameter. |
formsMessageListener
|
advanced |
The class that the Forms client uses to enable recording of Forms messages for Tool Vendor Interface (TVI)/Intercept Server. |
fsalcheck
|
advanced |
Specifies whether to perform checksum comparison of Forms standalone app launcher. When enabled, it triggers a comparison to be made on server. The checksum of FSAL on the client machine will be compared with the checksum of FSAL archived on the server. Default: This parameter is an application system parameter. |
guiMode
|
applet |
Specifies the visibility of the default Windows menu bar and the Windows title bar. Valid values are
Default: Note: This parameter is applicable for a menu bar only when no menu is specified for a form in the Form Builder; if there is any menu associated with the form, then this parameter is not applicable. In case of window-bars, this parameter is applicable even if there is a menu specified for that form in the Form Builder. This parameter does not affect title bars in alert windows or pop-up windows. |
gzipCompressApplet
|
add-on |
Specifying Default: This parameter is an application system parameter. |
heartBeat
|
add-on |
The interval, in minutes, at which a client sends a packet to the server to indicate that it is still running. Fractional values are allowed, for example 0.5 for 30 seconds. This parameter is similar to Default: If the Note: It is not recommended to set the value ofheartBeat greater than the value of FORMS_TIMEOUT because this will result in the termination of the user's existing session. Terminating the running form in this manner will result in the user session becoming unresponsive.
Note: IfheartBeat is higher than the parameter, session-timeout , then the value of session-timeout takes precedence over heartBeat . To increase the value of heartBeat , the value of session-timeout must be greater than heartBeat . For information about this parameter, see Session Timeout in Developing Web Applications, Servlets, and JSPs for Oracle WebLogic Server.
This parameter is an application system parameter. |
height
|
basic |
The height of the form applet, in pixels. Required. Default from You can also specify the value of the height in percentage. This value is relative to the size of the content area of the browser. The value should not exceed 100% or be less than 1%. To use a percentage value, the numeric value must be followed by a percentage (%) sign as shown in the following example: HEIGHT=75%. This example specifies that the applet height is 75% of the size of the browser's content area. |
hideActivityBar
|
add-on applet param |
Specifies whether the Forms activity bar (also known as progress bar) should be hidden. Default: |
hideAppletVersion
|
add-on applet param |
Specifies whether to display the Forms applet version in the client side console. Default: This parameter is an application system parameter. |
hideClientExceptions
|
add-on applet param |
Specifies whether Java exceptions should not be displayed to the end-user in both the Java console and error message dialog. Default: |
highContrast
|
advanced |
When Default: |
host
|
trace |
Specifies the host for the debugging session. This parameter is necessary for debugging purposes only. It identifies the host on which the forms engine process is started. This parameter is a runform parameter. |
HTMLafterForm
|
html |
HTML content to be added to the page below the area where the Forms application is displayed. |
HTMLbeforeForm
|
html |
HTML content to be added to the page above the area where the Forms application is displayed. |
HTMLbodyAttrs
|
html |
Attributes for the <BODY> tag of the HTML page. |
HTMLdelimiter
|
advanced |
The delimiter for variable parameters in the base HTML files. Default: This parameter is an application system parameter. |
idleTimeout
|
advanced |
Specifies, in seconds, how much idle time can elapse before a SYSTEM_CLIENT_IDLE event will fire. This parameter is an application system parameter. |
ignoreSaaCache
|
add-on applet param |
Specifies whether the Oracle Forms Standalone Application Launcher should ignore files specified by the archive configuration parameter (for example, Default: |
imageBase
|
plugin |
Specifies where icon or image files are stored. Valid values:
Default from Default if unspecified: |
isResizable
|
applet add-on |
Specifies whether the Forms separate frame resizing ability is enabled. When used with Default: |
JavaScriptBlocksHeartBeat
|
advanced |
Specifies whether HeartBeat is blocked when a JavaScript call is a blocking call. Default: |
java_version
|
plugin |
Specifies which Java version is to be used on the end-user environment. Required. Default from |
jpi_classid
|
plugin |
Oracle Java Plug-in class ID. Required. Default from |
jpi_codebase
|
plugin |
The location from which the Java Plug-in (not the applet) could be downloaded if necessary. Currently unused because Java itself no longer provides a default location that would work with this value. |
jpi_download_page
|
plugin |
Oracle Java Plug-in download page. Default: |
jpi_mimetype
|
plugin |
The value of the TYPE applet parameter. Required. Default from |
legacy_lifecycle
|
advanced |
Applet parameter for Oracle Java Plug-in. A value of Default: |
log
|
trace |
Supports tracing and logging. The value of this parameter, if set, is the file name of the trace log file. This parameter is a sub-argument for otherparams. This parameter is treated as an application system parameter even if the |
logo
|
applet |
Specifies the image file that should appear at the Forms menu bar. Specify NO for no logo. Leave empty to use the default Oracle logo.
|
logoutTargetURLParamName
|
advanced |
The name of the URL parameter which specifies the URL to which Oracle Access Manager will redirect after performing a logout. Default: This parameter is an application system parameter. |
lookAndFeel
|
applet |
Specifies the application's look-and-feel. Valid values [case-insensitive]: Default from |
maxeventwait
|
add-on |
The interval, in milliseconds, at which a client sends a packet to the server to indicate that it is still running and check for new events that might have occurred. This parameter is similar to heartbeat: the lower interval takes precedence. Setting this value too low will cause a significant increase in network traffic and therefore should be use cautiously. This parameter is an application system parameter. |
maxRuntimeProcesses
|
add-on |
The maximum allowable number of concurrent Forms run-time processes. It should be set a value that reflects the customer's hardware configuration (and the portion that can be used by Forms applications). A value of Default: This parameter is a global system parameter. It must be specified in the default config section of |
networkRetries
|
advanced |
Number of times client should retry if a network failure occurs. Default: |
networkStats
|
add-on applet param |
Specifies whether to enable the display of the aggregate statistics in the status bar and the display of round-trip statistics in the Java console. Default: |
oam_redirect_root |
servlet |
Used in cases where mixed protocols are used between the end-user, OHS, Forms, and OAM. Valid values include |
obr
|
advanced |
For internal use only. Default: This parameter is a sub-argument for otherparams. |
otherparams
|
advanced |
Command line parameters to pass to the Forms run-time process in addition to form and userid. Default from This parameter is a runform parameter. Note: Special syntax rules apply to this parameter when it is specified in a URL: a + may be used to separate multiple name=value pairs. See Specifying Special Characters in Values of Runform Parameters. For production environments, include the otherparams parameter in the value of therestrictedURLparams parameter, in order to provide better control over which runform parameters end users can specify in a URL.
|
pageTitle
|
html |
HTML page title. Default from |
pingStats
|
add-on applet param |
Specifies whether to enable the pinging of the managed server by the Java applet when Forms is being rendered. The ping result is, then, displayed on the Java console. Default: |
pingWait
|
add-on applet param |
The maximum amount of time (in milliseconds) that pinging of the managed server (specified by the pingStats parameter) must wait to receive a response from the server. Default: |
port
|
trace |
Port to use for debugging. This parameter is necessary for debugging purposes only. The value of this parameter identifies the port on which the forms engine process is listening. This parameter is ignored if Default: This parameter is a runform parameter. |
preserveHttpSessionId
|
add-on |
Specifies whether the HTTP session ID should be preserved after being made visible. This can happen during SSO authentication in two cases:
A value of Default: This parameter is an application system parameter. |
prestartIncrement
|
add-on |
The number of run-time processes to be created when the number of prestarted run-time processes is less than Default: This parameter is a global system parameter. For each config section, the value specified or inherited by that config section applies to any prestarting for the config section. The value is read from |
prestartInit
|
add-on |
The number of the run-time processes that should be spawned initially. Default: This parameter is a global system parameter. For each config section, the value specified or inherited by that config section applies to any prestarting for the config section. The value is read from |
prestartMin
|
add-on |
The minimum number of run-time processes to exist in the pool. Default: This parameter is a global system parameter. For each config section, the value specified or inherited by that config section applies to any prestarting for the config section. The value is read from |
prestartRuntimes
|
add-on |
Specifies whether run-time prestarting or pooling is enabled. Default: This parameter is a global system parameter. For each config section, the value specified or inherited by that config section applies to any prestarting for the config section. The value is read from |
prestartTimeout
|
add-on |
Time in minutes after which all the prestarted processes of this pool (configuration section) is stopped. A run-time process is removed from the prestart pool after the client connection is made and thus is not stopped. Default: This parameter is a global system parameter. For each config section, the value specified or inherited by that config section applies to any prestarting for the config section. The value is read from |
query_only |
add-on |
Set this parameter to Default: This parameter is a sub-argument for otherparams. |
quiet
|
add-on |
Set this parameter to Default: This parameter is a sub-argument for otherparams. |
record
|
trace |
Supports tracing and logging. Valid values:
This parameter is a sub-argument for otherparams. |
recordFileName
|
advanced |
The name of the file (for example, d:\temp\out.log ) that stores the recorded Forms messages.
|
removeCommentLinesFromApplet
|
add-on |
Specifies whether to remove comment lines from html/jnlp sent to client. This can improve start up performance and reduce the amount of content being sent to user. Default: This parameter is an application system parameter. |
restrictedURLchars
|
add-on |
Comma-separated list of characters which are restricted from use in the request URL's query string. This parameter is an application system parameter. |
restrictedURLparams |
advanced |
Comma-separated list of parameters which are rejected if specified in a URL. Default from This parameter is an application system parameter. |
sendHeartBeatBean |
add-on applet param |
Set this parameter to Default: |
separateFrame
|
applet |
Specifies whether the applet appears within a separate window. Default: |
separate_jvm
|
advanced |
A Boolean parameter specifying that the applet should run in its own JVM instance on the user environment. This is useful for applets which can not tolerate any interference from other applets running in the same JVM and potentially consuming heap space or other resources. This setting only applies to running applications embedded in a browser like Microsoft Internet Explorer. Default: |
serverApp |
advanced |
Specifies the name of the application-specific Registry.dat entries to be used. The value of For example, Registry.dat may include two or more default Fontname settings:
To use the Sales custom settings, set Note: Only entries that begin withdefault in Registry.dat can be customized using the serverApp parameter. See Managing Registry.dat with Fusion Middleware Control.
Default: |
serverURL
|
advanced |
The URL path to Forms Listener Servlet. Required. Default from This parameter is an application system parameter. |
sessionCookieName
|
add-on |
The cookie-name (if any) specified in Required for SSO processing if a cookie-name other than JSESSIONID is specified in Default: This parameter is a global system parameter. It must be specified in the default config section of |
sessionCookiePath
|
add-on |
The cookie-path (if any) specified in weblogic.xml or weblogic-application.xml. Required for SSO processing if a cookie-path other than / is specified in weblogic.xml or weblogic-application.xml. Default: This parameter is a global system parameter. It must be specified in the default config section of |
smartBarHeight
|
add-on applet param |
Specifies the desired Smartbar menu size to be used at runtime. Valid values [case-insensitive]: Smartbar icons larger than the button size will be clipped. Smartbar icons smaller than the button size will scale up to fill the button, unless the |
smartbarIconScaling
|
add-on applet param |
Specifies whether Smartbar icons smaller than the button size will scale up to fill the button. Default: |
smoothScalingMaxZoom
|
add-on applet param |
Smooth scaling often produces a significant improvement in image quality when the scaling factor is significantly lower than 100%. This improvement decreases as scale increases, and seems unnoticeable when the scaling factor is significantly greater than 100%. The downside of smooth scaling is that a large scaling factor may produce an For example, set |
splashScreen
|
applet |
Specifies the image file that should appear before the applet appears. Specify NO for no splash. Leave empty to use the default splash image. Supported image formats are: gif , png , and jpg . To set the parameter include the file name (for example, myfile.gif ) or the virtual path and file name (for example, images/myfile.gif ).
|
ssoCancelUrl
|
sso |
The URL to redirect to if the user presses Cancel in the dynamic resource creation page. This parameter is an application system parameter. |
ssoDynamicResourceCreate |
sso |
Specifies whether dynamic resource creation is enabled if the resource is not yet created in the (Oracle Internet Directory) OID. Default: This parameter is an application system parameter. |
ssoErrorUrl
|
sso |
The URL to redirect to if This parameter is an application system parameter. |
ssoLogout
|
sso |
Specifies whether the SSO session should be logged out while exiting the Forms application. Default: This parameter is an application system parameter. |
ssoLogoutRedirect
|
sso |
The URL which the browser should be redirected to after SSO logout. This parameter is an application system parameter. |
ssoMode
|
sso |
Specifies whether the URL is protected in which case, Default: This parameter is an application system parameter. |
ssoProxyConnect
|
sso |
Specifies whether session should operate in proxy user support. Set Default: This parameter is a sub-argument for otherparams. |
ssoSaaBrowserLaunchTimeout
|
add-on |
Specifies, in seconds, how long the Forms servlet will wait for the initial request from the browser that was spawned by the Standalone launcher for SSO authentication. If the interval expires, the fatal error FRM-93249 is reported. Valid values: Integers in the range 1-300. Default: This parameter is an application system parameter. |
ssoSaaBrowserPageTimeout
|
add-on |
Specifies, in seconds, how long the Forms servlet will wait for the user to enter data into a browser page during SSO authentication for a Standalone application. If the interval expires, the fatal error FRM-93382 or FRM-93383 is reported. Valid values: An integer >= 15, or 0 (which indicates that the Forms servlet will wait indefinitely). Default: This parameter is an application system parameter. |
ssoSaaWaitInterval
|
add-on |
Specifies the interval, in seconds, at which the Standalone launcher reissues requests directly to the Forms servlet while SSO authentication is proceeding in the launched browser window. Larger values reduce network traffic but increase the chances of an intermediate agent timing out (thereby producing the fatal error FRM-93248). Valid values: An integer >= 5, or 0 (which indicates that the Standalone launcher should not reissue requests). Default: This parameter is an application system parameter. |
ssoSuccessLogonUrl
|
sso add-on |
The URL to redirect to if SSO authentication completes successfully for a Standalone application. This parameter is an application system parameter. |
tabstop
|
add-on applet param |
Specifies the tab stop size for all multi-line text fields in the application. Valid values: A positive integer no greater than the total character width of any field in which tabs are expected to be used. Default: |
term
|
advanced |
The full path of a custom key binding file (to be used instead of the standard This parameter is a sub-argument for otherparams. |
tracegroup
|
trace |
Supports tracing and logging. This parameter is a sub-argument for otherparams. |
userid
|
basic |
Login string. Example: This parameter is a runform parameter. |
websocketJSILogging
|
add-on applet param |
Specifies whether to enable WJSI logging. Output will be sent to the Java Console. Default: |
websocketJSIServerTimeout
|
add-on applet param |
The time, in minutes, that the WJSI server should continue to run while idle. After this time, the value specified by the Default: |
websocketJSISessionTimeout
|
add-on applet param |
The time, in minutes, that the WJSI session should be permitted to remain idle before being terminated. Default: |
webstart
|
plugin |
Specifies whether Web Start should be enabled. This parameter is an application system parameter. |
webstart_codebase
|
add-on |
The URL to the application Codebase. This may be required when using Java Web Start and the Forms managed server (WLS) is behind a proxy server. Example: This parameter is an application system parameter. |
WebUtilVersion
|
add-on applet param |
Specifies whether to display the WebUtil version in the client side console. Default: |
width
|
basic |
The width of the form applet, in pixels. Required. Default from You can also specify the value of the width in percentage. This value is relative to the size of the content area of the browser. The value should not exceed 100% or be less than 1%. To use a percentage value, the numeric value must be followed by a percentage (%) sign as shown in the following example: WIDTH=75% This example specifies that the applet width is 75% of the size of the browser's content area. |