This MBean represents the configuration of the certificate
revocation checking across all certificate authorities. Many of the
attributes in this MBean may be overridden per certificate
authority using the specific CertRevocCaMBean
.
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.CertRevocMBean
For more information, see: |
||
Factory Methods | No factory methods. Instances of this MBean are created automatically. | ||
Access Points |
You can access this MBean from the following MBean attributes:
|
This section describes attributes that provide access to other MBeans.
|
Returns the CertRevocCaMBeans representing the certificate authority overrides, which have been configured to be part of this certificate revocation checking configuration.
Factory Methods | createCertRevocCa
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupCertRevocCa(String name)
Returns a |
Privileges | Read only |
Type | CertRevocCaMBean[] |
Relationship type: | Containment. |
This section describes the following attributes:
Private property that disables caching in proxies.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Determines whether certificate revocation checking is enabled.
Privileges | Read/Write |
Type | boolean |
Determines the refresh period for the CRL local cache, expressed as a percentage of the validity period of the CRL.
For example, for a validity period of 10 hours, a value of 10% specifies a refresh every 1 hour.
The validity period is determined by the CRL, and is calculated as the (next reported update time) - (this update time).
The valid range is 1 through 100.
Privileges | Read/Write |
Type | int |
Default Value | 100 |
Minimum value | 1 |
Maximum value | 100 |
Determines the type of CRL cache, related to the physical
storage of the CRLs. The ldap
CRL cache type can be
specified, but is not currently supported.
The value specified in this attribute determines which related
CrlCacheType*
attributes apply.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | FILE |
Legal Values |
|
Determines whether the CRL Distribution Point background downloading, to automatically update the local CRL cache, is enabled.
Privileges | Read/Write |
Type | boolean |
Determines the overall timeout for the Distribution Point CRL download, expressed in seconds.
The valid range is 1 thru 300 seconds.
Privileges | Read/Write |
Type | long |
Default Value | 10 |
Minimum value | 1 |
Maximum value | 300 |
Determines whether the CRL Distribution Point processing to update the local CRL cache is enabled.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
Return whether the MBean was created dynamically or is persisted to config.xml
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Determines whether certificate path checking should fail, if revocation status could not be determined.
Privileges | Read/Write |
Type | boolean |
Return the unique id of this MBean instance
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Returns the MBean info for this MBean.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Determines the certificate revocation checking method order.
NOTE that omission of a specific method disables that method.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | OCSP_THEN_CRL |
Legal Values |
|
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Determines whether a nonce is sent with OCSP requests, to force a fresh (not pre-signed) response.
Privileges | Read/Write |
Type | boolean |
Determines the maximum number of entries supported by the OCSP response local cache. The minimum value is 1.
Privileges | Read/Write |
Type | int |
Default Value | 1024 |
Minimum value | 1 |
Maximum value | 2147483647 |
Determines whether the OCSP response local cache is enabled.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
Determines the refresh period for the OCSP response local cache, expressed as a percentage of the validity period of the response.
For example, for a validity period of 10 hours, a value of 10% specifies a refresh every 1 hour.
The validity period is determined by the OCSP response, and is calculated as the (next reported update time) - (this update time).
The valid range is 1 through 100.
Privileges | Read/Write |
Type | int |
Default Value | 100 |
Minimum value | 1 |
Maximum value | 100 |
Determines the timeout for the OCSP response, expressed in seconds.
The valid range is 1 thru 300 seconds.
Privileges | Read/Write |
Type | long |
Default Value | 10 |
Minimum value | 1 |
Maximum value | 300 |
Determines the time tolerance value for handling clock-skew differences between clients and responders, expressed in seconds.
The validity period of the response is extended both into the future and into the past by the specified amount of time, effectively widening the validity interval.
The value is >=0 and <=900. The maximum allowed tolerance is 15 minutes.
Privileges | Read/Write |
Type | int |
Default Value | 0 |
Minimum value | 0 |
Maximum value | 900 |
Return the immediate parent for this MBean
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type |
Returns false if the MBean represented by this object has been unregistered.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return all tags on this Configuration MBean
This attribute is dynamic and takes effect immediately.
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
Returns the type of the MBean.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|