The level of acknowledgment for Safe Data assured sub mode. When assured replication is configured in Safe Data mode, this value defines the number of replication servers (with the same group ID of the local server) that should acknowledge the sent update before the LDAP client call can return.
Default Value
1
Allowed Values
An integer value. Lower value is 1. Upper value is 127 .
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
assured-timeout
Description
The timeout value when waiting for assured replication acknowledgments. Defines the number of milliseconds the server will wait for assured acknowledgments (in either Safe Data or Safe Read assured replication modes) before returning the LDAP client call regardless.
Defines the assured replication mode of the replicated domain. The assured replication can be disabled or enabled. When enabled, two modes are available: Safe Data or Safe Read modes.
Default Value
not-assured
Allowed Values
not-assured - Assured replication is not enabled. Updates sent for replication (for being replayed on other LDAP servers in the topology) are sent without waiting for any acknowledgment and the LDAP client call returns immediately.
safe-data - Assured replication is enabled in Safe Data mode: updates sent for replication are subject to acknowledgment from the replication servers that have the same group ID as the local server (defined with the group-id property). The number of acknowledgments to expect is defined by the assured-sd-level property. After acknowledgments are received, LDAP client call returns.
safe-read - Assured replication is enabled in Safe Read mode: updates sent for replication are subject to acknowledgments from the LDAP servers in the topology that have the same group ID as the local server (defined with the group-id property). After acknowledgments are received, LDAP client call returns.
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
base-dn
Description
Specifies the base DN of the replicated data.
Default Value
None
Allowed Values
A valid DN.
Multi-valued
No
Required
Yes
Admin Action Required
None
Advanced Property
No
Read-only
Yes
conflicts-historical-purge-delay
Description
This delay indicates the time (in minutes) the domain keeps the historical information necessary to solve conflicts.When a change stored in the historical part of the user entry has a date (from its replication ChangeNumber) older than this delay, it is candidate to be purged. The purge is applied on 2 events: modify of the entry, dedicated purge task.
Allows you to exclude specific attributes from being replicated to this server. If the fractional-exclude configuration attribute is used, attributes specified in this attribute will be ignored (not added/modified/deleted) when an operation performed from another directory server is replayed on the local server. Note that the use of this configuration attribute is mutually exclusive with the use of the fractional-include attribute.
Default Value
None
Allowed Values
Defines attribute(s) of one particular class or of all possible classes, to exclude from the replication.
Multi-valued
Yes
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
fractional-include
Description
Allows you to include specific attributes to be replicated to this server. If fractional-include configuration attribute is used, only attributes specified in this attribute will be added/modified/deleted when an operation performed from another directory server is replayed on the local server. Note that the use of this configuration attribute is mutually exclusive with the use of the fractional-exclude attribute.
Default Value
None
Allowed Values
Defines attribute(s) of one particular class or of all possible classes, to include in the replication.
Multi-valued
Yes
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
group-id
Description
The group ID associated with this replicated domain. This value defines the group ID of the replicated domain. The replication system will preferably connect and send updates to replicate to a replication server with the same group ID as its own one (the local server group ID).
Default Value
1
Allowed Values
An integer value. Lower value is 1. Upper value is 127 .
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
heartbeat-interval
Description
Specifies the heart-beat interval that the Directory Server will use when communicating with Replication Servers. The Directory Server expects a regular heart-beat coming from the Replication Server within the specified interval. If a heartbeat is not received within the interval, the Directory Server closes its connection and connects to another Replication Server.
Specifies the window size that this Directory Server may use when communicating with remote Directory Servers for initialization.
Default Value
100
Allowed Values
An integer value. Lower value is 0.
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
isolation-policy
Description
Specifies the behavior of the Directory Server if a write operation is attempted on the data within the Replication Domain when none of the configured Replication Servers are available.
Default Value
reject-all-updates
Allowed Values
accept-all-updates - Indicates that updates should be accepted even though it is not possible to send them to any Replication Server. Best effort is made to re-send those updates to a Replication Server when one is available, however those changes are at risk because they are only available from the historical information. This mode can also introduce high replication latency.
reject-all-updates - Indicates that all updates attempted on this Replication Domain are rejected when no Replication Server is available.
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
log-changenumber
Description
Indicates if this server logs the ChangeNumber in access log. This boolean indicates if the domain should log the ChangeNumber of replicated operations in the access log.
Default Value
false
Allowed Values
true
false
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
publish-referrals
Description
Indicates whether the local server is publishing its own referrals to the rest of the topology. If the local server publishes its referrals the urls defined by the attribute ds-cfg-referrals-url will be returned otherwise default urls will be used.
Default Value
true
Allowed Values
true
false
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
referrals-url
Description
The URLs other LDAP servers should use to refer to the local server. URLs used by peer servers in the topology to refer to the local server through LDAP referrals. If this attribute is not defined, all URLs available to access this server are used. If defined, only the URLs specified here are used.
Default Value
None
Allowed Values
A LDAP URL compliant with RFC 2255.
Multi-valued
Yes
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
replication-server
Description
Specifies the addresses of the Replication Servers within the Replication Domain to which the Directory Server should try to connect at startup time. Addresses must be specified using the syntax: hostname:port
Default Value
None
Allowed Values
A host name followed by a ":" and a port number.
Multi-valued
Yes
Required
Yes
Admin Action Required
None
Advanced Property
No
Read-only
No
server-id
Description
Specifies a unique identifier for the Directory Server within the Replication Domain. Each Directory Server within the same Replication Domain must have a different server ID. A Directory Server which is a member of multiple Replication Domains may use the same server ID for each of its Replication Domain configurations.
Default Value
None
Allowed Values
An integer value. Lower value is 1. Upper value is 65535 .
Multi-valued
No
Required
Yes
Admin Action Required
None
Advanced Property
No
Read-only
Yes
window-size
Description
Specifies the window size that the Directory Server will use when communicating with Replication Servers.
Default Value
100
Allowed Values
An integer value. Lower value is 0.
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
workflow-element
Description
Specifies the related Workflow Element in the Replication Domain .
Default Value
None
Allowed Values
The DN of any Workflow Element. The referenced workflow element must be enabled.
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
No
Read-only
No
Advanced Properties
changetime-heartbeat-interval
Description
Specifies the heart-beat interval that the Directory Server will use when sending its local change time to the Replication Server. The Directory Server sends a regular heart-beat to the Replication within the specified interval. The heart-beat indicates the change time of the Directory Server to the Replication Server.
Specifies the handshake-timeout interval for the handshake between the replication servers. The soTimeout value to be used at the time of handshake phase with the Replicaton Server. It requires the server to be restarted.
This value indicates the maximum size of the pending changes list.
Default Value
10000
Allowed Values
An integer value. Lower value is 0.
Multi-valued
No
Required
No
Admin Action Required
None
Advanced Property
Yes
Read-only
No
solve-conflicts
Description
Indicates if this server solves conflicts. This boolean indicates if this domain keeps the historical information necessary to solve conflicts. When set to false the server will not maintain historical information and will therefore not be able to solve conflicts. This should therefore be done only if the replication is used in a single master type of deployment.