The MBean that defines the configuration properties for the embedded LDAP server for the WebLogic domain.
Since | 7.0.0.0 | ||
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.EmbeddedLDAPMBean
|
||
Factory Methods | No factory methods. Instances of this MBean are created automatically. | ||
Access Points |
You can access this MBean from the following MBean attributes:
|
This section describes the following attributes:
Specifies whether the embedded LDAP server should allow anonymous connections.
Privileges | Read/Write |
Type | boolean |
The maximum number of backup copies that should be made for the embedded LDAP server.
This value limits the number of zip files in the ldap/backup directory.
Privileges | Read/Write |
Type | int |
Default Value | 7 |
Minimum value | 0 |
Maximum value | 65534 |
The hour at which the embedded LDAP server should be backed up.
The Backup Hour value is used in conjunction with the Backup Minute value to determine the time at which the embedded LDAP server data files are backed up. At the specified time, WebLogic Server suspends writes to the embedded LDAP server, backs up the data files into a zip files in the ldap/backup directory, and then resumes writes.
Privileges | Read/Write |
Type | int |
Default Value | 23 |
Minimum value | 0 |
Maximum value | 23 |
The minute at which the embedded LDAP server should be backed up.
The Backup Minute value is used in conjunction with the Back Up Hour value to determine the time at which the embedded LDAP server data files are backed up
Privileges | Read/Write |
Type | int |
Default Value | 5 |
Minimum value | 0 |
Maximum value | 59 |
Specifies whether a cache is used with the embedded LDAP server.
This cache is used when a managed server is reading or writing to the master embedded LDAP server that is running on the Administration server.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
The size of the cache (in kilobytes) that is used with the embedded LDAP server.
Privileges | Read/Write |
Type | int |
Default Value | 32 |
Minimum value | 0 |
The time-to-live of the cache (in seconds) that is used with the embedded LDAP server.
Privileges | Read/Write |
Type | int |
Default Value | 60 |
Minimum value | 0 |
Private property that disables caching in proxies.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The credential (usually a password) used to connect to the embedded LDAP server.
If this credential has not been set, WebLogic Server generates a password at startup, initializes the attribute, and saves the configuration to the config.xml file. If you want to connect to the embedded LDAP server using an external LDAP browser and the embedded LDAP administrator account (cn=Admin), change this attribute from the generated value.
As of 8.1 sp4, when you get the value of this attribute, WebLogic Server does the following:
Retrieves the value of the CredentialEncrypted
attribute.
Decrypts the value and returns the unencrypted password as a String.
When you set the value of this attribute, WebLogic Server does the following:
Encrypts the value.
Sets the value of the CredentialEncrypted
attribute
to the encrypted value.
Using the Credential
attribute is a potential
security risk because the String object (which contains the
unencrypted password) remains in the JVM's memory until garbage
collection removes it and the memory is reallocated. Depending on
how memory is allocated in the JVM, a significant amount of time
could pass before this unencrypted data is removed from memory.
Instead of using this attribute, use
CredentialEncrypted()
.
For more information, see:
Privileges | Read/Write |
Type | java.lang.String |
Encrypted | true |
The credential (usually password) used to connect to the embedded LDAP server.
If this credential has not been set, WebLogic Server generates a password at startup, initializes the attribute, and saves the configuration to the config.xml file. If you want to connect to the embedded LDAP server using an external LDAP browser and the embedded LDAP administrator account (cn=Admin), change this attribute from the generated value.
To set this attribute, use
weblogic.management.EncryptionHelper.encrypt()
to
encrypt the value. Then set this attribute to the output of the
encrypt() method.
To compare a password that a user enters with the encrypted
value of this attribute, go to the same WebLogic Server instance
that you used to set and encrypt this attribute and use
weblogic.management.EncryptionHelper.encrypt()
to
encrypt the user-supplied password. Then compare the encrypted
values.
Privileges | Read/Write |
Type | byte[] |
Encrypted | true |
Return whether the MBean was created dynamically or is persisted to config.xml
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the unique id of this MBean instance
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Whether keep alive is enabled in the socket connection
Privileges | Read/Write |
Type | boolean |
Specifies whether a Managed Server should always connect to the master LDAP server (contained in the Administration Server), instead of connecting to the local replicated LDAP server (contained in the Managed Server).
Privileges | Read/Write |
Type | boolean |
Returns the MBean info for this MBean.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type |
Specifies whether a Managed Server should refresh all replicated data at boot time. (This is useful if you have made a large amount of changes when the Managed Server was not active, and you want to download the entire replica instead of having the Administration Server push each change to the Managed Server.)
Privileges | Read/Write |
Type | boolean |
Returns false if the MBean represented by this object has been unregistered.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return all tags on this Configuration MBean
This attribute is dynamic and takes effect immediately.
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
Specifies the maximum number of seconds to wait for results from the embedded LDAP server before timing out. If this option is set to 0, there is no maximum time limit.
Privileges | Read/Write |
Type | int |
Default Value | 0 |
Minimum value | 0 |
Returns the type of the MBean.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|