This MBean represents a messaging bridge destination for a JMS messaging product. Each messaging bridge consists of two destinations that are being bridged:
Source: The message producing destination. A bridge instance consumes messages from the source destination.
Target: The destination where a bridge instance forwards messages produced by the source destination.
Since | 7.0.0.0 | ||
Security roles | The following roles have read, write, and invoke permission for all non-encrypted attributes and operations in this MBean:
|
||
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.JMSBridgeDestinationMBean
|
||
Factory Methods | |||
Access Points Inherited from BridgeDestinationCommonMBean |
Because this MBean extends or implements BridgeDestinationCommonMBean, you can also access this MBean by retrieving BridgeDestinationCommonMBeans. The following attributes contain BridgeDestinationCommonMBeans and its subtypes:
|
This section describes the following attributes:
The JNDI name of the adapter used to communicate with the specified destination.
This name is specified in the adapter's deployment descriptor file and is used by the WebLogic Server Connector container to bind the adapter in WebLogic Server JNDI.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | eis.jms.WLSConnectionFactoryJNDIXA |
Private property that disables caching in proxies.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The CLASSPATH of the bridge destination.
Used mainly to connect to WebLogic Server 6.0 or earlier.
When connecting to a destination that is running on WebLogic Server 6.0 or earlier, the bridge destination must supply a CLASSPATH that indicates the locations of the classes for the earlier WebLogic Server implementation.
Deprecated.
Privileges | Read/Write |
Type | java.lang.String |
The connection factory's JNDI name for this JMS bridge destination.
Privileges | Read/Write |
Type | java.lang.String |
The connection URL for this JMS bridge destination.
Privileges | Read/Write |
Type | java.lang.String |
The destination JNDI name for this JMS bridge destination.
Privileges | Read/Write |
Type | java.lang.String |
The destination type (queue or topic) for this JMS bridge destination.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | Queue |
Legal Values |
|
Return whether the MBean was created dynamically or is persisted to config.xml
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the unique id of this MBean instance
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The initial context factory name for this JMS bridge destination.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | weblogic.jndi.WLInitialContextFactory |
Returns the MBean info for this MBean.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type |
Returns false if the MBean represented by this object has been unregistered.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return all tags on this Configuration MBean
This attribute is dynamic and takes effect immediately.
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
Returns the type of the MBean.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The optional user name the adapter uses to access the bridge destination.
All operations on the specified destination are done using this user name and the corresponding password. Therefore, the User Name/Password for the source and target destinations must have permission to the access the underlying destinations in order for the messaging bridge to work.
Privileges | Read/Write |
Type | java.lang.String |
The user password that the adapter uses to access the bridge destination.
As of 8.1 sp4, when you get the value of this attribute, WebLogic Server does the following:
Retrieves the value of the UserPasswordEncrypted
attribute.
Decrypts the value and returns the unencrypted password as a String.
When you set the value of this attribute, WebLogic Server does the following:
Encrypts the value.
Sets the value of the UserPasswordEncrypted
attribute to the encrypted value.
Using this attribute (UserPassword
) is a potential
security risk because the String object (which contains the
unencrypted password) remains in the JVM's memory until garbage
collection removes it and the memory is reallocated. Depending on
how memory is allocated in the JVM, a significant amount of time
could pass before this unencrypted data is removed from memory.
Instead of using this attribute, use
UserPasswordEncrypted
.
For more information, see:
Privileges | Read/Write |
Type | java.lang.String |
Encrypted | true |
The encrypted user password that the adapter uses to access the bridge destination.
To set this attribute, use
weblogic.management.EncryptionHelper.encrypt()
to
encrypt the value. Then set this attribute to the output of the
encrypt() method.
To compare a password that a user enters with the encrypted
value of this attribute, go to the same WebLogic Server instance
that you used to set and encrypt this attribute and use
weblogic.management.EncryptionHelper.encrypt()
to
encrypt the user-supplied password. Then compare the encrypted
values.
Privileges | Read/Write |
Type | byte[] |
Encrypted | true |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|