This MBean represents an SNMP agent that is proxied by a WebLogic Server SNMP agent.
| Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.SNMPProxyMBean
|
| Factory Methods |
This section describes the following attributes:
Private property that disables caching in proxies.
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The community name to be passed on for all SNMPv1 requests to this proxied SNMP agent.
If you specify a security name for this proxied agent, the WebLogic SNMP agent ignores this community name. Instead, the agent encodes the security name in an SNMPv3 request and forwards the SNMPv3 request to this proxied agent.
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | public |
Return whether the MBean was created dynamically or is persisted to config.xml
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the unique id of this MBean instance
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read only |
| Type | long |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The address on which the external SNMP agent for which the WebLogic SNMP Agent is acting as a proxy is listening for incoming requests from SNMP managers that use the UDP protocol.
If not specified the Server's ListenAddress is used as the ListenAddress of the external SNMPAgent.
| Available Since | Release 12.2.1.3.0 |
| Privileges | Read/Write |
| Type | java.lang.String |
Returns the MBean info for this MBean.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
| Privileges | Read only |
| Type | javax.management.MBeanInfo |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName:
Name=user-specified-name
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read/Write |
| Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read/Write |
| Security roles | Write access is granted only to the following roles:
|
| Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
| Privileges | Read only |
| Type | weblogic.management.WebLogicObjectName |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The root of the object identifier (OID) tree that this proxied SNMP agent controls.
| Privileges | Read/Write |
| Type | java.lang.String |
Return the immediate parent for this MBean
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read/Write |
| Type |
The port number on which this proxied SNMP agent is listening.
| Privileges | Read/Write |
| Type | int |
| Minimum value | 0 |
| Maximum value | 65535 |
Returns false if the MBean represented by this object has been unregistered.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The security level that the proxied SNMP agent expects for the specified security name.
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | noAuthNoPriv |
| Legal Values |
|
The user name on whose behalf the WebLogic SNMP agent forwards v3 requests. If not specified, the request is forwarded as a v1 request.
If you specify a security name, you must also specify a security level that is equal to or lower than the security level that is configured for communication between the WebLogic SNMP agent and SNMP managers. For example, if the WebLogic SNMP agent requires incoming SNMPv3 requests to use the authentication protocol but no privacy protocol, the security level for this proxy must be either Authentication Only or None. Note that if you want to use the authorization or privacy protocols, you must configure credential mapping in the WebLogic Server security realm.
The WebLogic SNMP agent cannot forward or pass through the credentials that are contained in SNMPv3 requests from SNMP managers. Instead, the agent authenticates and performs other security operations on incoming requests, and then constructs a new request to forward to a proxied agent.
For more information, see:
| Privileges | Read/Write |
| Type | java.lang.String |
Return all tags on this Configuration MBean
This attribute is dynamic and takes effect immediately.
| Available Since | Release 12.2.1.0.0 |
| Privileges | Read/Write |
| Type | class java.lang.String[] |
The number of milliseconds that the WebLogic Server SNMP agent waits for a response to requests that it forwards to this proxy agent.
If the interval elapses without a response, the WebLogic SNMP agent sends an error to the requesting manager.
| Privileges | Read/Write |
| Type | long |
| Default Value | 5000 |
| Minimum value | 0 |
Returns the type of the MBean.
This attribute is not dynamic and requires a server restart to take effect.
| Privileges | Read only |
| Type | java.lang.String |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
| Operation Name | "addTag" |
| Parameters | Object [] { tag }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
| Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
| Operation Name | "freezeCurrentValue" |
| Parameters | Object [] { attributeName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|
| Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
| Operation Name | "getInheritedProperties" |
| Parameters | Object [] { propertyNames }
where:
|
| Signature | String [] {
"[Ljava.lang.String;" } |
| Returns |
class |
Check if the value of a property is inherited from template mbean or not.
| Operation Name | "isInherited" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
| Operation Name | "isSet" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
Remove a tag from this Configuration MBean
| Operation Name | "removeTag" |
| Parameters | Object [] { tag }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
| Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
| Operation Name | "restoreDefaultValue" |
| Parameters | Object [] { attributeName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|
| Exceptions |
|
Restore the given property to its default value.
| Operation Name | "unSet" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|