Encapsulates the timestamp information that is associated with a Web Service security configuration.
Since | 9.0.0.0 | ||
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.WebserviceTimestampMBean
|
||
Factory Methods | No factory methods. Instances of this MBean are created automatically. | ||
Access Points |
You can access this MBean from the following MBean attributes:
|
This section describes the following attributes:
Private property that disables caching in proxies.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
If clocks are synchronized, this attribute describes the accuracy of the synchronization between two clocks: the client and the server.
ClockSkew is expressed in milliseconds. Clock skew is enforced by rendering all times into milliseconds since a common time 0 and using these times for comparisons. For example, if your clocks are accurate to within 1 minute of each other, you would set your skew to 1 minute * 60 seconds * 1000 milliseconds or 60000.
Privileges | Read/Write |
Type | long |
Default Value | 60000 |
Minimum value | 0 |
Specifies whether the Web Service assumes synchronized clocks.
If the clockSynchronized attribute is false, the Web Service rejects all inbound messages with that contain expirations, because this is the only safe way to ensure that the message hasn't already expired. In this case, the Web Service also does not enforce a freshness policy.
If this attribute is set to true, then the Web Service enforces expirations on inbound messages to the best of its ability and enforces an optional freshness policy (via maxProcessingDelay).
The default value of this attribute is true.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
Return whether the MBean was created dynamically or is persisted to config.xml
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the unique id of this MBean instance
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Specifies the freshness policy for received messages: the Web Service observes the processing delay by subtracting the Created time in the Timestamp from the current time.
If the observed processing delay is greater than maxProcessingDelay plus clockSkew, then the message is rejected as stale.
This attribute is specified in milliseconds.
Setting maxProcessingDelay to NO_MAX_PROCESSING_DELAY disables to enforcement of the freshness policy.
Privileges | Read/Write |
Type | long |
Default Value | -1 |
Returns the MBean info for this MBean.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read/Write |
Type |
Returns false if the MBean represented by this object has been unregistered.
This attribute is not dynamic and requires a server restart to take effect.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return all tags on this Configuration MBean
This attribute is dynamic and takes effect immediately.
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
Returns the type of the MBean.
This attribute is not dynamic and requires a server restart to take effect.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Represents the length of time the sender wants the outbound message to be valid.
When the validityPeriod is positive, the TimestampHandler inserts an Expires element into the Timestamp header. The validityPeriod is expressed in seconds: the Expires time will be that many seconds ahead of the Timestamp's Created time.
Privileges | Read/Write |
Type | int |
Default Value | 60 |
Minimum value | 1 |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|