HBA Features and Specifications

The Oracle Storage Dual-Port 32 Gb Fibre Channel PCIe Low Profile HBA, which uses Broadcom, formerly Emulex, technology (part number: 7335907), is a low-profile, PCIe card that allows connectivity to Fibre Channel (FC) storage outside of the server. The board interfaces an eight-lane PCIe bus, supporting two enhanced Small Form-Factor Pluggable Plus (SFP+) FC optical media ports. Each independent FC port operates at 32 Gb/s and features 32/16/8 autonegotiation.

Feature Description

Lane width

x8 PCIe 3.0 x8 lane width up to 8 GT/s per lane

Data rate (maximum)

32 Gb/s FC per port, negotiable to 16, and 8 Gb/s

PCIe hot-plug and hot-swap functionality

Supported

Number of FC ports

Two

FC transfer rate

6400 MBps/line rate 28.05 GBAUD, full duplex

FC topologies

Switched fabric (N-Port), arbitrated loop (NL-Port), and point-to-point (N-Port)

Note: Fibre Channel arbritrated loop is not supported.

FC SAN boot support

Booting is supported for all supported operating systems. For more information about supported operating systems, see Operating System and Technology Requirements.

Diagnostic support

Provided by Oracle VTS software

External connectors

Two enhanced Small-Form Factor Pluggable Plus (SFP+) multimode optics with LC-style connectors per port

FC Compatibility

  • Fibre Channel Physical and Signaling (FC-PH, FC-PH2/3)

  • Fibre Channel Generic Services (FC-GS-6)

  • Fibre Channel Framing and Signaling (FC-FS-4)

  • Fibre Channel Link Services (FC-LS-2), including NPIV

  • Fibre Channel Physical Interface (FC-PI, FC-PI-4, FC-PI-5, PC-PI6)

  • Fibre Channel Tape and Medium Changers (FC-Tape)

  • Fibre Channel Protocol for SCSI, (FCP-4-SCSI)

  • Fibre Channel Switch Fabric (FC-SW-4)

  • FMA support

  • T-10 DIFF or T10-PI support

LED indicators

Two LEDs per port (yellow and green) on the front panel as status indicators

Maximum power consumption

10.6 Watts