Removing the HBA Hardware

The procedure in this section describe how to remove the HBA. Refer to your system installation guide or service manual for detailed HBA adapter removal instructions.

To Remove the HBA

  1. Use an ESD strap (refer to Observing ESD and Handling Precautions).
  2. Refer to your system documentation to halt the operating system and shut down, power off, and unplug the system.
  3. Disconnect all cables.
  4. Unscrew the case screws and remove the system case.
  5. Remove the mounting bracket of the HBA from the system by unscrewing the panel screw or removing the clip, whichever is being used.
  6. Remove the HBA from its PCIe slot.