Supported Speeds Field Value Does Not Display 32 Gb As a Supported Speed

Bug ID: 25904735

Issue:

When issuing the fcinfo hba-port command from a virtual function domain, the output for the HBA does not display 32 Gb as a supported speed, even though 32 Gb is a supported speed. The following example shows values that might be displayed.

$fcinfo hba-port
             HBA Port WWN: 31000024ff19a37c
		Port Mode: Initiator
		Port ID: 0
		OS Device Name: /dev/cfg/c2
		Manufacturer: QLogic Corp.
		Model: 7335902
	...
		Supported Speeds: 4Gb 8Gb 16Gb
		Current Speed: 16Gb

However, if you issue the fcinfo hba-port command from a physical function domain, the accurate Supported Speeds values are displayed.

$fcinfo hba-port
...
		Supported Speeds: 8Gb 16Gb 32Gb
...

Workaround:

Check for the availability of a patch to address this issue. You can obtain patches at: Oracle Driver Download

Until a patch is available, do not issue the fcinfo hba-port command from inside a virtual function domain. Instead, issue the command from a physical domain.