Familiarize yourself with the physical features of the HBA.
Ensure that you have the proper cables for the HBA.
You will need at least one, straight mini-SAS HD (high-density) cable that
has a SFF-8644 x4 connector on the host end that will connect to the HBA
(the connector on the target end depends on the connection requirement of
the hard disk drive enclosure).
Use only Oracle-provided SAS cables (provided with your
Oracle system at time of purchase). For more information or to purchase cables for
your Oracle system, go to Oracle Store.
Cable connectors are keyed so that you cannot insert them
incorrectly.
Unpack the box containing the
HBA in a static-free environment and inspect it for damage.
Note:
Leave the HBA in its
protective bag until you are ready to install it. If there is damage, contact
Oracle customer support.
Refer to your system installation or service manual for instructions on
how to remove the system cover, disconnect the AC power cords, and turn off
power from the system, if required.