1. Oracle Storage 12 Gb SAS PCIe HBA, External Installation Guide For HBA Models 7110118 and 7110119
  2. Hardware Installation and Removal
  3. Removing the HBA

Removing the HBA

If you need to remove the HBA, follow the procedure in this section.

To Remove the HBA

  1. Prepare your operating system for HBA removal.
  2. Attach an antistatic wrist strap.
  3. Refer to the service manual for your specific system to remove the cover from the system, power down the system, and remove AC power cords from the system, if required.
  4. Refer to the service manual for your specific system to locate the HBA in the chassis of the system.
  5. Disengage the retention clip that is securing the HBA to the chassis of the system and pull up carefully to unseat the HBA from the PCIe slot.
  6. Detach all cables from the HBA.
  7. Refer to the service manual for your specific system to reattach the system cover, reinstall AC power cords to the system, and power on the system, as necessary.