8 Comparing Yum Version 3 With DNF

The following table compares Yum v3 features, commands, and options with the DNF tool that's introduced in Oracle Linux 8.

Yum v3 Feature, Command, or Option	DNF Feature, Command, or Option	Notable Differences
--skip-broken option	--skip-broken option Is an alias for the --setopt=strict=0 option	When used for installations: Skips all packages (or those with broken dependencies that are passed to DNF) without raising an error or causing the operation to fail. You can use either option with DNF. You can also set this behavior as the default in the dnf.conf file. When used for upgrades: The semantics that were used to trigger the yum command with the--skip-broken option are set for dnf update as the default. Note that you don't need to use the --skip-broken option with the dnf upgrade command. Instead, use the --best option to use only the latest version of packages in transactions.
yum update command	dnf update command	Command syntax change only. No differences with the behavior for dnf update andyum update.
yum upgrade command	dnf upgrade command	Aside from the syntactical difference, the behavior of dnf upgrade is the same as yum upgrade. Note that in Yum v3, yum upgrade is the same as yum --obsoletes update.
clean_requirements_on_remove option	clean_requirements_on_remove option	This option is enabled by default in DNF, which might cause confusion when comparing the remove operation results between the two Yum versions, as DNF removes more packages.
resolvdep command	Not available Use the dnf provides command to find which package provides a specific file.	The Yum v3 command is maintained for legacy purposes only.
deplist command	Not available Use the dnfrepoquery--deplist command to find dependencies for a package.	The yumdeplist alias is provided for Yum v3 compatibility with the dnf repoquery --deplist command.
Excludes (and repository excludes)	Excludes (and repository excludes)	Yum v3 respects excludes during installations and upgrades; whereas, DNF respects all operations, including erasing, and listing.
includepkgs option	include option	In DNF, the directive name for repository (and main) configuration has been renamed for better alignment with its DNF counterpart, exclude .
skip_if_available option	skip_if_available option	This option is enabled by default in DNF. Without this setting, and without explicitly setting skip_if_unavailable=True in the relevant repository .ini file, Yum immediately stops and reports a repository error.
overwrite_groups option	Not available	This configuration option has been removed in DNF. Instead, when DNF identifies several groups with the same group ID, it merges the contents of the groups.
mirrorlist_expire option	Not available	DNF uses metadata_expire for the expiring metadata, and the mirrorlist file.
"metalink" mention in the mirrorlist repository option.	Not available	A fix has been applied in DNF to render the following information in the yum.conf(5) inapplicable: If the mirrorlist URL contains the word metalink, then the value of mirrorlist is copied to metalink (if metalink isn't set).
alwaysprompt option	Not available	This option has been removed from DNF to simplify configuration.
group_package_types option	Not available	This option has been removed from DNF to simplify configuration.
upgrade_requirements_on_install	Behaves as though disabled.	Because DNF tolerates the use of other package managers, it's possible that not all changes that are made to RPMDB are stored in the history of transactions. Thus, DNF doesn't fail in this situation, which means the force option is no longer required.
yum swap command	dnfshell command This command performs a remove and install transaction. dnf --allowerasing command	Using the dnf --allowerasing command is the same as using yum swap A B, where you want to replace A (providing P) with B (also providing P), which conflicts with A, without removing C (which requires P).
Dependency processing details displayed during the depsolving phase.	Not available	In DNF, the depsolver considers all dependencies for update candidates, which would result in a lengthy output. Note that the Yum v3 output can also be confusing and lengthy, especially for large transactions.
yum provides command	dnf provides command	The behavior of the dnf provides command is aligned to how it's documented; whereas, during the execution of the yum provides command, Yum applies certain, undocumented behavior. For example, if you run the yum provides sandbox command, Yum applies extra heuristics to interpret the sandbox part of the command, then it sequentially prepends entries from the PATH environment variable to the command to match a file that's provided by a package. DNF doesn't emulate this undocumented behavior.
--enableplugins option	Not available	This option isn't documented for DNF, as all plugins are enabled by default.
throttle and bandwidth options	throttle and bandwidth options	In DNF, for simultaneous downloads, the total downloading speed is now throttled. This support wasn't available in the Yum v3 tool, as downloaders ran in different processes.
installonlypkgs option	installonlypkgs	DNF appends the list values from the installonlypkgs configuration option to DNF defaults. Yum v3 overwrites the defaults by option values.
deltarpm_percentage option	Not available	The Boolean deltarpm option controls whether delta RPM files are used. Yum DNF doesn't support the use of the deltarpm_percentage option. Instead, the tool chooses the best value of the DRPM/RPM ratio to decide whether using deltarpm is appropriate in a particular situation.
.srpm files and non-existent package handling	.srpm files and non-existent package handling	DNF stops early with an error if a command requesting an installing operation on a local .srpm file is run. Yum v3 issues a warning and continues by installing the tour package. Note that Yum DNF emits the same error for package specifications that don't match any available package.
Promoting a package to install to a package that obsoletes it.	Promoting a package to install to a package that obsoletes it.	DNF doesn't automatically replace a request to install a package (A) by installing another package (B) if package B would obsolete package(A. The Yum v3 behavior is to perform the action if the obsoletes configuration option is enabled. However, note that this behavior isn't documented and can be harmful.
--installroot option	--installroot option	DNF provides more predictable behavior for this option and handles the path differently than the --config option, where this path is always related to the host system. Yum v3 combines this path with the installroot option. The reposdir option is also handled slightly differently in Yum DNF. For example, if one reposdirs path exists inside installroot, then repositories are taken only from installroot. Whereas, Yum v3 tests each path from reposdir.
Prompts displayed after a transaction table	Prompts displayed after a transaction table	The prompts that are displayed after a transaction table are different in DNF than they're for Yum v3. DNF doesn't provide download functionality after displaying the transaction table. You're only prompted to continue with the transaction or not. To download packages, use the download command.
list command	list command	The DNF behavior for this command is to list all packages from all repositories, which means there can be duplicate package names with different repository names listed. This change was made to enable users to choose a preferred repository.

There isn't a direct replacement for the yum-updateonboot command in DNF. However, you can obtain a similar result by running the dnfautomatic command.

The following table compares Yum V3 plugins with DNF plugins.

Yum Version 3 Plugin	DNF Plugin	Package
yum check	dnf repoquery --unsatisfied	dnf
yum-langpacks		dnf-langpacks
yum-plugin-auto-update-debug-info	Option in debuginfo-install.conf	dnf-plugins-core
yum-plugin-copr	dnf copr	dnf-plugins-core
yum-plugin-fastestmirror	fastestmirror option in dnf.conf	dnf
yum-plugin-fs-snapshot		dnf-plugins-extras-snapper
yum-plugin-local		dnf-plugins-core
yum-plugin-merge-conf		dnf-plugins-extras-rpmconf
yum-plugin-priorities	priority option in dnf.conf	dnf
yum-plugin-remove-with-leaves	dnfautoremove	dnf
yum-plugin-show-leaves		dnf-plugins-core
yum-plugin-versionlock		dnf-plugins-core
yum-rhn-plugin		dnf-plugin-spacewalk

The following table compares Yum v3 utilities with DNF plugins.

Yum Version 3 Utility	DNF Plugin	DNF Package
debuginfo-install	dnf debuginfo-install	dnf-plugins-core
find-repos-of-install	dnf list installed	dnf
needs-restarting	dnf tracer	dnf-plugins-extras-tracer
package-cleanup	dnf list, dnf repoquery	dnf, dnf-plugins-core
repoclosure	dnf repoclosure	dnf-plugins-extras-repoclosure
repodiff	dnf repodiff	dnf-plugins-core
repo-graph	dnf repograph	dnf-plugins-extras-repograph
repomanage	dnf repomanage	dnf-plugins-extras-repomanage
repoquery	dnf repoquery	dnf
reposync	dnf reposync	dnf-plugins-core
repotrack	dnf download –resolve –alldeps	dnf-plugins-core
yum-builddep	dnf builddep	dnf-plugins-core
yum-config-manager	dnf config-manager	dnf-plugins-core
yum-debug-dump	dnf debug-dump	dnf-plugins-extras-debug
yum-debug-restore	dnf debug-restore	dnf-plugins-extras-debug
yumdownloader	dnf download	dnf-plugins-core

The following table lists the Yum v3 package-cleanup command and its DNF replacement.

Yum Version 3 Command	DNF Command
package-cleanup--dupes	dnfrepoquery--duplicates
package-cleanup--leaves	dnfrepoquery--unneeded
package-cleanup--orphans	dnfrepoquery--extras
package-cleanup--oldkernels	dnfrepoquery--installonly
package-cleanup--problems	dnfrepoquery--unsatisfied
package-cleanup--cleandupes	dnfremove--duplicates
package-cleanup--oldkernels	dnfremove--oldinstallonly