raidconfig Error Codes
Errors might be returned if you attempt to configure the RAID entry for an unsupported parameter. For example, if the RAID controller does not support the configured RAID level, the CLI displays a user-friendly error string identifying the misconfiguration and returns a matching error code.
The following table lists the error codes and strings specific to this tool.
Code Number | Error Description |
---|---|
100 |
No controllers available. |
101 |
Controller does not support RAID. |
102 |
No physical disks associated with controller. |
103 |
Invalid controller. |
104 |
Invalid disk. |
105 |
Invalid RAID volume. |
106 |
RAID level not supported by controller. |
107 |
Default RAID level not supported. |
108 |
A defined disk is in use. |
109 |
Number of disks exceeds allowed number for this level. |
110 |
Failure retrieving internal data. |
111 |
Number of disks requested exceeds the number of available disks. |
112 |
Cannot define both actual and requested number of disks. |
113 |
Option not supported by controller. |
114 |
Invalid stripe size for controller. |
115 |
Invalid number of subarrays. |
116 |
Cannot retrieve RAID data. |
118 |
RAID creation failure. |
119 |
RAID deletion failure. |
120 |
Disk defined multiple times. |
121 |
Disks must be in the same controller. |
122 |
The maximum number of RAID Volumes has been created. |
123 |
Invalid RAID configuration. |
124 |
The RAID Volume is in use. |
125 |
Incomplete RAID configuration. |
126 |
Failure writing internal data. |
127 |
Command requires disks to be entered. |
128 |
Disk is not a dedicated spare. |
129 |
Disk is not a global spare. |
130 |
Controller does not support dedicated spares. |
131 |
Controller does not support global spares. |
132 |
Command requires disks or RAID volume to be entered. |
133 |
A defined disk is not in a RAID volume. |
134 |
Cannot set both read and write cache in same command. |
135 |
Import could not create RAID volumes or spares - disks may be in use. |
136 |
Subarrays option is required for this RAID level. |
137 |
Incomplete command, no options have been supplied. |
138 |
Number of disks requested exceeds the number of available disks with the same capacity. |
139 |
RAID configuration does not have enough disks for the requested RAID level. |
140 |
RAID configuration has too many disks for the requested RAID level. |
141 |
Disk detected as in use by another controller. Use raidconfig restore or clear command. |
142 |
The number of spares exceeds the maximum allowed by controller. |
143 |
This command does not support the number-disks option. |
144 |
Task type is invalid. |
145 |
Task type must be defined. |
146 |
Task type is only valid for disks. |
147 |
Task type is only valid for RAID Volumes. |
148 |
For this task, disk must not be in use. |
149 |
For this task, disk must be in a RAID Volume. |
150 |
Command currently cannot be executed. |
151 |
The source disk must be in a RAID Volume. |
152 |
The destination disk must not be in a RAID Volume. |
153 |
The source and destination cannot be the same disk. |
154 |
The source and destination are not the same size. |
155 |
No foreign configuration detected for controller. |
156 |
Unable to add disk to RAID Volume. |
157 |
Task cannot be started, make sure task is listed in Startable Tasks. |
158 |
Task cannot be stopped, make sure task is listed in Stoppable Tasks. |
159 |
Invalid command, filename must come before options. |
160 |
All disks must be the same size. |
161 |
Command is not valid for this RAID level. |
162 |
Subdisk sizes must be less than disk capacity. |
163 |
Could not restore controller configuration. |
164 |
The maximum number of subdisks is 16. |
165 |
Invalid configuration, make sure spare is same size as disks in RAID Volume. |
166 |
Disk mode is set to JBOD. Disable JBOD mode then try again. |
167 |
Disk is in use by RAID controller. Remove from RAID configuration then try again. |
Parent topic: CLI Tools Error Codes