- Oracle Hardware Management Pack 2.4 Server Management Agents User's Guide
- Configuring Oracle ILOM SNMP Trap Forwarding Using itpconfig
- itpconfig Trap Forwarding Commands
- How to Enable Trap Forwarding
How to Enable Trap Forwarding
-
To enable trap forwarding, issue the following command:
#
itpconfig enable trapforwarding --ipaddress=ipaddress --port=port --community=communityNote:
If the trap forwarding is already enabled, use the
itpconfig modify trapforwarding
command instead.Mandatory options for
itpconfig enable trapforwarding
are:Option Description --ipaddress
Sets the destination IP address for the forwarded trap. This can be loopback (127.0.0.1) or any other valid IP address. This must correspond to the configuration of the SNMP listener.
--port
Sets the destination port for the forwarded trap. There is no default value, but 162 is a common port value. This must correspond to the configuration of the SNMP listener.
--community
Sets the destination SNMP V2c community for the forwarded trap. This value must correspond to the configuration of the SNMP listener.
Example:
#
itpconfig enable trapforwarding --ipaddress=127.0.0.1 --port=1234 --community=test
Parent topic: itpconfig Trap Forwarding Commands