ILOM Watchdog Parameters

Note:

Starting with Oracle Hardware Management Pack 2.4.9.0, the HMP watchdog agent and associated ILOM and host watchdog services are no longer available.

The ILOM watchdog parameters can be set by the user in one of the following ways:

• Preferred method: Use the ilomconfig commands to change the parameters. See Configure ILOM Watchdog Using ilomconfig Commands. For more information on ilomconfig CLI commands, see ILOM Watchdog ilomconfig Commands in Oracle Hardware Management Pack 2.4 Server CLI Tools User’s Guide.

• Manually edit the configuration file. See Manually Edit the Configuration File.

The following table lists the ILOM watchdog parameters.

Parameter Name	Parameter in Configuration File	Description	Possible Values	Default value
Query Time Interval	ilom_watchdog_query_time_interval	The interval at which the host queries Oracle ILOM (seconds). If Oracle ILOM does not respond the host performs the Timer Action.	Positive integer up to 214748364	60 seconds
Timer Action	ilom_watchdog_timer_action	The action which the host performs when it notices that Oracle ILOM is unresponsive	Warning|Reset	Warning
Number of Consecutive SP Resets	ilom_watchdog_number_sp_reset	If the value of Timer Action is Reset, this parameter tells the host the number of times the host resets the SP before it gives up	Positive integer up to 20	2
Admin State	ilom_watchdog_admin_state	The ILOM watchdog state	enable|disable	disable