CLI and Web Host Storage Device Properties
User Interface Configurable Target and User Role:
|
||
---|---|---|
Property | Default | Description |
mode ( |
disabled (for systems using SP firmware 3.2.4 or earlier) miniroot (for Oracle SPARC M7 and T7 series servers with Solaris OS image preinstalled and using SP firmware 3.2.5.5 or later) |
disabled |remote|miniroot The Mode property controls the Host Storage Device redirection behavior.
CLI Syntax for
Single server: set /SP/services/kvms/host_storage_device mode=[disabled|remote|miniroot] Note. The Miniroot option is available on SPARC T7 and M7 servers only. Multi-domain server: set /Servers/PDomains/PDomains-n/SP/services/kvms/host_storage_device mode=[disabled|remote| miniroot] |
Server URI ( |
(none) |
NFS, Samba, or SSHFS URI Note. The SSHFS server URI option supports user
authentication through the use of a username and password or a user
generated SSH key. To use SSH key-based authentication, copy the public key
for the authentication type used (either DSA or RSA) from Note.The Samba option supports user authentication through the use of username and password. When the Host Storage Device Mode is set to Remote, enter the location of the image on the remote server using either the NFS, Samba, or SSHFS protocol.
CLI Syntax for
Single server: set /SP/services/kvms/host_storage_device target_URI=NFS_or_Samba_or_SSHFS_URI Multi-domain server: set /Servers/PDomains/PDomain_n/SP/services/kvms/host_storage_device target_URI=NFS_or_Samba_or_SSHFS_URI |
Remote Storage User Name ( |
(none) |
Samba Server username or SSHFS Server user name If you are mounting the virtual storage device using a Samba or SSHFS server URI, authentication is required. When Host Storage Device mode is set to Remote, do the following:
CLI Syntax for
Single server: set /SP/services/kvms/host_storage_device username=username Multi-domain server: set /Servers/PDomains/PDomain_n/SP/services/kvms/host_storage_device username=username |
Remote Storage Password ( |
(none) |
Samba Server password or SSHFS Server password If you are mounting the virtual storage device using Samba, authentication is required. When Host Storage Device mode is set to Remote, do the following:
CLI Syntax for
Single server: set /SP/services/kvms/host_storage_device password=password Multi-domain server: set /Servers/PDomains/PDomain_n /SP/services/kvms/host_storage_device password=password |
Status ( |
disabled |
The read-only Status property indicates the operational state of the Remote Device redirection service. The possible values of the Status property are as follows:
CLI Syntax for
Single server: show /SP/services/kvms/host_storage_device status Multi-domain server: show /Servers/PDomains/PDomain-n/SP/services/kvms/host_storage_device status |