Controlling Host Power to Server
Oracle ILOM provides a set of parameters that enables system administrators to control the power state of a host server.
System administrators can issue power control commands from the Oracle ILOM CLI or web interface. For more details about each power control command, see the following table.
Note:
For Oracle multi-domain server systems, you can control the power state on individual server domains.Table 8-1 Remote Power Control Commands for Host Managed Devices
User Interface
Configurable Target and User Role:
|
|||
---|---|---|---|
Web | CLI | Applies to: | Description |
Reset |
|
|
Use Reset to assert a power-cycle to a managed server, while keeping power applied to system components (such as disk drives and so). |
Graceful Reset |
|
|
Use Graceful Reset to gracefully shut down the host operating system prior to power-cycling the managed server. |
Immediate Power Off |
|
|
Use Immediate Power Off to directly shut down the power to the managed device. |
Graceful Shutdown and Power Off |
|
|
Use Graceful Shutdown and Power Off to gracefully shut down the host operating system prior to shutting down the power to the managed device. |
Power On |
|
|
Use Power On to apply full power to the managed device. |
Power Cycle |
|
|
Use Power Cycle to turn off system power to all system components and then apply full power to all system components. |