Viewing Component Information

Note:

You can use get commands to view component information. For a description of valid MIB objects for this procedure, see the table following this procedure.

1. Log in to a host that has an SNMP tool and the Oracle ILOM MIBs installed. For example, type:
   ssh username @ snmp_manager_ip_address

   Password : password

2. To view the firmware revision, type:

   % snmpget SNMP_agent entPhysicalFirmwareRev.1  
                    

   The following table describes the Component Information SNMP MIB objects.

   MIB Object	Description	Values	Type	Default
   entPhysical Name	The textual name of the physical entity.	Size: 0 to 255	String	Zero- length string
   entPhysical Descr	A textual description of the physical entity.	Size: 0 to 255	String	None
   entPhysical ContainedIn	The value of entPhysicalIndex for the physical entity that contains this physical entity. A value of 0 indicates this physical entity is not contained in any other physical entity.	Range: 0 to 2147483647	Integer	None
   entPhysical Class	An indication of the general hardware type of the physical entity.	other(1), unknown(2), chassis(3), backplane(4), container(5), powerSupply(6), fan(7), sensor(8), module(9), port(10), stack(11)	Integer	None
   entPhysical FirmwareRev	The vendor-specific firmware revision string for the physical entity.	Size: 0 to 255	String	Zero- length string