ASR Configuration Properties
The following table describes the ASR CLI and Web interface properties in Oracle ILOM.
Table 9-2 ASR Client Properties
Property | Default | Description |
---|---|---|
Status
( |
Not applicable, read-only property. | The Status identifies the operational
state of the ASR Client in Oracle ILOM. Possible status values are:
|
State
( |
Disabled | Disabled | Enabled
The ASR Client state must be enabled to send hardware telemetry messages to the specified Oracle Service (Endpoint URL). Disabling the ASR Client state prevents Oracle ILOM from sending hardware telemetry messages to Oracle Services. To enable the ASR Client State, select the State check box. CLI Syntax to Set ASR State set /SP/clients/asr state= enabled | disabled |
Endpoint
( |
Oracle Transport LinK | provided transfer link (default) |
user-specified
Use the Endpoint property to directly or indirectly connect the ASR Client to Oracle Services. By default, the Endpoint property URL directly connects to the remote ASR Service at Oracle, which requires a username and password. Optionally, you can configure the Endpoint property to indirectly connect to the ASR Services by specifying the address of a local ASR Manager Relay. Note: Indirect endpoint configurations aggregate the telemetry data from many host instances. Endpoint URL Syntax Examples
CLI Syntax to Set Endpoint set /SP/clients/asr endpoint= https://transport.oracle.com | ASR Manager Relay URL address Security Notes:
|
Strict Certificate Mode | Enabled | Enabled (default) | Disabled
The Strict Certificate Mode controls the validation of the Endpoint URL. When the Strict Certificate Mode is enabled, it requires a local copy of the Endpoint SSL Certificate.
|
Username & Password
( ( |
Not applicable, user-defined. | Enter a valid My Oracle Support
username (email address) and password. If you don't have a username, you can
create a user account and register it with My Oracle Support at My
Oracle Support
Note If an invalid My Oracle Support account is specified, Oracle ILOM will not be able to successfully forward hardware telemetry messages detected from the managed server to Oracle Services. CLI Syntax to Set Username and Password set /SP/clients/asr username= user_defined password= user_defined |
Proxy
( ( ( |
Not applicable, user defined. | If you are using an HTTPS/HTTP proxy
server to access the Internet, configure the following proxy server properties:
Note If you are not using a proxy server to access the Internet, you can leave the following proxy server properties blank.
Note In cases where the following message appears, ASR Manager in relay mode is different from a proxy, ensure that the proxy server properties for the Oracle ILOM ASR Client are properly configured. CLI Syntax to Set Proxy set /SP/clients/asr proxy-host= user_defined proxy-user= user_defined proxy-password= user_defined |