1. Oracle ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 5.1.x
  2. Performing Oracle ILOM Maintenance and Configuration Management Tasks
  3. Storing and Managing SP Firmware Images - As of Firmware Version 5.0
  4. View Backup Firmware Image Properties

View Backup Firmware Image Properties

Note:

The ability to view backup firmware properties is supported on newer Oracle server platforms such as SPARC T7 and later platforms; as well as X86 X7 and later platforms. This functionality is not supported on SPARC M-Series platforms.

Before You Begin

  • The managed SP must have Oracle ILOM firmware version 5.0 or later installed.
  • Oracle ILOM Admin (a) privileges are required to view the backup firmware properties.
  1. To view the properties associated with the backup firmware image, perform the following steps using one of the Oracle ILOM interfaces:
    Oracle ILOM Interface View Backup Firmware Properties

    Web
    1. Click Maintenance > Firmware Update.
    2. Click the button for Enter Update Mode, then click OK in the update confirmation dialog box to proceed.

      Note. The Firmware Update page displays the properties associated with the current backup Image. If a backup image does not exist on the SP, the property values "Not Available" appear.

    CLI

    1. Type: 
      show /SP/firmware/backupimage

      Response Example:

      /SP/firmware/backupimage
    Targets:

    Properties:
        build = r129388
        date = Fri Mar  8 09:28:46 PST 2019
        load_uri = (Cannot show property)
        upload_date = Fri Mar  8 09:31:50 2019
        version = 5.0.0.0

    Commands:
        cd
        load
        set
        show

Related Information: