Initial Setup: Frequently Asked Questions

• Does the Oracle ILOM service processor (SP) boot up automatically?

  The Oracle ILOM service processor boots automatically when a power cable is connected to your Oracle server. For information about how to connect a power cable to your server, refer to the hardware installation documentation shipped with your Oracle server.

• Where can I locate documentation for connecting a serial console or terminal to a managed device?

  Refer to the Oracle server hardware installation guide.

• Is a root account provided with Oracle ILOM?

  Oracle ILOM is shipped from the factory with a preconfigured root account. You should use the preconfigured root account for initial login and initial setup of user account(s).

  To prevent unauthorized access to the managed device, change the preconfigured root account (login: root password: changeme) on each service processor (SP).

• What format does Oracle ILOM accept for IPv4 and IPv6 network addresses?

  For example:

  • IPv4 format: 10.8.183.106
  • IPv6 format: fec0:a:8:b7:214:4fff:5eca:5f7e/64
• Are factory default settings provided with Oracle ILOM?

  Factory default settings are provided for most Oracle ILOM system management features. You can use these default settings, or you can customize them to meet your needs. For a list of factory default settings shipped with Oracle ILOM, see Factory Default Settings

• Which Oracle ILOM user interface should I use?

  Most all Oracle ILOM features and functions are accessible from both the web interface and command-line interface (CLI). A sub-set of Oracle ILOM features and functions are also available from the SNMP and IPMI interfaces, as well as the Oracle ILOM Web Service REST API. For more information about features supported by Oracle ILOM SNMP and IPMI interfaces, refer to the For information about Oracle ILOM REST API, see .

• I am not able to establish a network management connection to Oracle ILOM.

  If you are experiencing difficulties with connecting to Oracle ILOM, see the following suggested solutions for resolving connection issues:

  • Verify that a physical Ethernet connection between your network and the NET MGT port on your Oracle server is established.
  • For a local (non-network) connection to Oracle ILOM, ensure that the IPv4 state is enabled, or both the IPv4 and IPv6 states are enabled for dual-stack network environments.
  • Use a command-line network tool, like Ping, to verify connectivity to the network.
  • For IPv6 management connections, ensure that the IPv6 address in the URL is enclosed by brackets.

    For example:

    • Web interface URL format:

      https://[fe80::221:28ff:fe77:1402]

    • CLI download file URL format:

      -> load -source tftp://[fec0:a:8:b7:214:rfff:fe01:851d]desktop.pkg

• If I prematurely deleted the root account, how can I recreate it?

  You can recover the Oracle ILOM root account on the server SP by resetting the SP to factory defaults. In the web interface, click ILOM Administration > Configuration Management > Reset Defaults.

  Important: Resetting the defaults to factory, removes all log files and reverts all configuration properties to default values.

  For an alternative method to recover the Oracle ILOM root account, contact Oracle Service.

• What are the latest features available with Oracle ILOM?

  See Updates to Oracle ILOM 5.1.0 Firmware.