1. Oracle ILOM Protocol Management Reference SNMP and IPMI Firmware Release 5.1.x
  2. View Component Information and the Oracle ILOM Event Log (SNMP)
  3. Viewing Component Information

Viewing Component Information

Note:

You can use get commands to view component information. For a description of valid MIB objects for this procedure, see the table following this procedure.

Follow these steps to view compoment MIB information.

  1. Log in to a host that has an SNMP tool and the Oracle ILOM MIBs installed. For example, type:

    ssh username @ snmp_manager_ip_address

    Password : password

  2. To view the firmware revision, type: 
    % snmpget  
                           SNMP_agent 
                           entPhysicalFirmwareRev.1

    The following table describes the Component Information SNMP MIB objects.

    MIB Object Description Values Type Default

    entPhysical

    Name

    The textual name of the physical entity.

    Size: 0 to 255

    String

    Zero- length string

    entPhysical

    Descr

    A textual description of the physical entity.

    Size: 0 to 255

    String

    None

    entPhysical

    ContainedIn

    The value of entPhysicalIndex for the physical entity that contains this physical entity. A value of 0 indicates this physical entity is not contained in any other physical entity.

    Range: 0 to 2147483647

    Integer

    None

    entPhysical

    Class

    An indication of the general hardware type of the physical entity.

    other(1),

    unknown(2),

    chassis(3),

    backplane(4),

    container(5),

    powerSupply(6),

    fan(7),

    sensor(8),

    module(9),

    port(10),

    stack(11)

    Integer

    None

    entPhysical

    FirmwareRev

    The vendor-specific firmware revision string for the physical entity.

    Size: 0 to 255

    String

    Zero- length string