fmadm
Command
Usage and Syntax
See the following table for a list of fault management repair commands and usage descriptions.
fmadm Repair Command | Use to: |
---|---|
|
Notify the Oracle ILOM Fault Manager that the specified faulted
component is not to be considered suspect in any fault events that have been
detected. The Syntax example: To instruct the Fault Manager to ignore a suspect fan module in a rackmounted server chassis, type: fmadm acquit /SYS/FANBD/FMn |
|
Notify the Oracle ILOM Fault Manager that the faulted event
identified by the uuid resource can be safely
ignored. The Syntax example: To instruct the Fault Manager to ignore the event identified by 6d76a0f4-b5f5-623c-af8b-9d7b53812ea1, type: fmadm acquit 6d76a0f4-b5f5-623c-af8b-9d7b53812ea1 |
|
Notify the Oracle ILOM Fault Manager that the specified
field-replaceable unit or customer-replaceable unit has been repaired. The
Syntax example: To notify the Fault Manager that a fan module in a rackmounted server chassis has been repaired, type: fmadm repaired /SYS/FANBD/FMn |
|
Notify the Oracle ILOM Fault Manager that the specified faulted field-replaceable unit or customer-replaceable unit has been replaced. This command should be used in those cases where the Oracle ILOM Fault Manager is unable to detect the replacement. Syntax example: To notify the Fault Manager that a fan module in a rackmounted server chassis has been replaced, type: fmadm replaced /SYS/FANBD/FMn |