BIOS Advanced Menu Gigabit Network Connection Options
The following table describes the BIOS Advanced Menu Gigabit network connection options.
| Setup Options | Options | Defaults | Description |
|---|---|---|---|
|
NIC configuration |
Use to configure the network interface controller. |
||
|
Link Speed |
Auto Negotiated 10 Mbs Half 10 Mbs Full 100 Mbs Half 100 Mbs Full |
NA |
Specifies the port speed used for the selected boot protocol. |
|
Wake on LAN |
Disable/Enabled |
NA |
Use this option to enable or disable wake on LAN. |
|
Blink LEDs |
0/1/2/3 |
0 |
Use to identify the physical network port by blinking the associated LED. |
|
UEFI Driver (R/O) |
NA |
NA |
Identifies the UEFI driver. |
|
Adapter PBA (R/O) |
NA |
NA |
Product board adapter (PBA) number. You can use the Intel Network Adapter PBA number to search for the adapter's model number. The PBA number is a nine digit number that is the last part of the adapter board serial number. The PBA number is presented in this format: xxxxxxx-xxx, for example, C80222-001. |
|
Device Name (R/O) |
NA |
NA |
Device name. |
|
Chip Type (R/O) |
NA |
NA |
Manufacturer and model number. |
|
PCI Device ID (R/O) |
NA |
1533 |
Device identifier. |
|
PCI Address (R/O) |
NA |
NA |
Bus device function identifier. Example format: Bus:Device:Function |
|
Link Status (R/O) |
NA |
Connected |
Specifies the link status of the network port. |
|
MAC Address (R/O) |
NA |
NA |
Lists the MAC address of the network interface controller (NIC). |
|
Virtual MAC Address (R/O) |
NA |
NA |
Lists the Virtual MAC address of the network interface controller (NIC). |