Go to main content

Oracle® Exadata Database Server X8-8 Service Manual

Exit Print View

Updated: June 2020
 
 

Back Panel Connector Locations

The following illustration shows and describes the locations of the back panel connectors. Use this information to set up the server, so that you can access diagnostic tools and manage the server during service.

The following figure shows the locations of the server back panel connectors and ports.

image:Figure of back panel connectors and ports.
Callout
Description
System/SMOD
Available On
1
Net management port (NET MGT)
System B – SMOD1
Dual 4-socket systems only
2
Serial management port (SER MGT)
System B – SMOD1
Dual 4-socket systems only
3
USB 3.0 port
System B – SMOD1
Dual 4-socket systems only
4
  • NET0, NET1, NET2, and NET3 ports on dual 4-socket systems

  • NET0, NET1, NET2, and NET3 ports on single 8-socket systems

  • Unused ports on single 4-socket systems

System B – SMOD1
Dual 4-socket and single 8-socket systems
5
Net management port (NET MGT)
System A – SMOD0
All systems
6
Serial management port (SER MGT)
System A – SMOD0
All systems
7
USB 3.0 port
System A – SMOD0
All systems
8
NET0, NET1, NET2, and NET3 ports on all systems
System A – SMOD0
All systems
9
Power connectors 2 and 3
System A – SMOD0
Always connect all four power supplies. Connect to 200-240 VAC only.
10
Power connectors 0 and 1
System B –SMOD1
Always connect all four power supplies. Connect to 200-240 VAC only.