Front Indicator Module
This section describes the front indicator module features.
The following figure shows the controls and indicators on the front indicator module (FIM).
| Callout | Assignment | Description |
|---|---|---|
|
1 |
System A |
Locate Button and indicator |
|
2 |
System A |
Fault-Service Required indicator |
|
3 |
System A |
System OK indicator |
|
4 |
System A |
On/Standby button |
|
5 |
System A |
SP OK indicator |
|
6 |
System B |
System Locate Button and Indicator |
|
7 |
System B |
Fault-Service Required indicator |
|
8 |
System B |
System OK indicator |
|
9 |
System B |
On/Standby button |
|
10 |
System B |
SP OK indicator |
|
11 |
System A |
System Overtemperature Warning indicator |
|
12 |
System A |
Chassis rear Fault-Service Required indicator |
|
13 |
0 through 3 - System A 4 through 7 - System B |
CMOD Fault-Service Required indicators 0 - 8 (from left to right) |
|
14 |
System B |
System Overtemperature Warning indicator |
|
15 |
System B |
Chassis rear Fault-Service Required indicator |
Note:
SMOD 1 is inactive on single 4-socket systems and has reduced functionality on single 8-socket systems.