Cold Service
Cold service components must be serviced when the server is completely powered off and all four AC power cords are disconnected from the server back panel AC power block.
The following components can be cold-serviced:
-
System module (SMOD), see Servicing System Module (SMOD) Components (FRU)
-
Host bus adapter (HBA) card, see Servicing the Host Bus Adapter (HBA) Card (FRU)
-
HBA cable, see Servicing the SAS Cable (FRU)
-
Energy Storage Module (ESM), see Servicing the Energy Storage Module and Cables (CRU)
-
Energy Storage Module cable, see Servicing the Energy Storage Module and Cables (CRU)
-
System clock battery, see Servicing the System Battery (CRU)
-
Fan frame, see Servicing Fan Modules (CRU) and Fan Frames (CRU)
-
Front indicator module, see (FIM) Servicing the Front Indicator Module (FRU)
-
Midplane, see Remove the Midplane Assembly
-
Internal USB flash drive (not used)
See Prepare the Server for Cold Service (Oracle ILOM CLI) or Prepare the Server for Cold Service (Oracle ILOM Web Interface).
The steps in these remote procedures use the Oracle ILOM CLI interface or web interface. Refer to Oracle ILOM 5.0 documentation.