Install the Midplane Assembly
Use this procedure to install the midplane assembly.
This procedure requires removing the server from the rack. Removing all front and back components lessens the weight of the server.
This is a cold-service procedure. Power down the system and disconnect all power cables before removing the server access panels.
Caution:
Hazardous voltage. Possibility of electrical shock if the power cables are connected to the server when accessing the midplane and bus bar assembly.
Caution:
The midplane assembly should be removed and replaced only by authorized Oracle Service personnel.
Since the midplane contains both A- and B-side Primary FRU containers, when the midplane needs to be replaced, Oracle Service personnel need to manually reprogram the FRU containers into FRUPROM0 and FRUPROM1.
This procedure requires a Phillips screwdriver and a mechanical lift. Do not lift the server manually. Use a mechanical lift instead.