In the BIOS Setup Utility, press the left and right arrow keys to select
the menu options.
As you select a menu option, the top-level menu for that menu option
appears.
To navigate options in a top-level menu, press the up and down arrow
keys.
Options that you can modify appear highlighted in the menu. User
instructions for a selected menu option appear on the upper right side of
the screen.
Modify an option by pressing the + or - (plus or minus) keys, or by
pressing Enter and selecting the option from the menu.
The navigation keys appear on the lower right side of the BIOS
screen.
Press the Esc key to return from a sub-menu to the previous menu.
Pressing Esc from a top-level menu is equivalent to selecting the Discard
Changes and Exit option in the Save Menu.
Modify parameters, as needed.
Press the F10 key to save your changes and exit the BIOS Setup
Utility.
Alternatively, you can select the Save menu, and select Save Changes and
Exit to save your changes and exit the BIOS Setup Utility.
Note:
After modifying any BIOS
settings, the subsequent reboot might take longer than a typical reboot where you
did not change any settings. The delay occurs because the changes to the BIOS
settings are synchronized with Oracle ILOM.