Serial Management Port
The serial management connector, labeled SER MGT, is an RJ-45 connector that can be accessed from the back panel. This port is the default connection to the server Oracle ILOM SP. Use this port only for server management.
Table 21-2 Default Serial Connections for Serial Port
| Parameter | Setting |
|---|---|
|
Connector |
SER MGT |
|
Rate |
115200 baud |
|
Parity |
None |
|
Stop bits |
1 |
|
Data bits |
8 |
The following figure and table describe the SER MGT port pin signals.
Table 21-3 Serial Management Port Signals
| Pin | Signal Description | Pin | Signal Description |
|---|---|---|---|
|
1 |
Request to Send |
5 |
Ground |
|
2 |
Data Terminal Ready |
6 |
Receive Data |
|
3 |
Transmit Data |
7 |
Data Set Ready |
|
4 |
Ground |
8 |
Clear to Send |
If you need to connect to the SER MGT port using a cable with either a DB-9 or a DB-25 connector, follow the pin descriptions in the tables to create a crossover adapter appropriate for your serial connection.
Table 21-4 RJ-45 to DB-9 Adapter Crossover Wiring Reference
| Serial Port (RJ-45 Connector) | Serial Port (RJ-45 Connector) | DB-9 Adapter | DB-9 Adapter |
|---|---|---|---|
| Pin | Signal Description | Pin | Signal Description |
|
1 |
RTS |
8 |
CTS |
|
2 |
DTR |
6 |
DSR |
|
3 |
TXD |
2 |
RXD |
|
4 |
Signal Ground |
5 |
Signal Ground |
|
5 |
Signal Ground |
5 |
Signal Ground |
|
6 |
RXD |
3 |
TXD |
|
7 |
DSR |
4 |
DTR |
|
8 |
CTS |
7 |
RTS |
Table 21-5 RJ-45 to DB-25 Adapter Crossover Wiring Reference
| Serial Port (RJ-45 Connector) | Serial Port (RJ-45 Connector) | DB-25 Adapter | DB-25 Adapter |
|---|---|---|---|
| Pin | Signal Description | Pin | Signal Description |
|
1 |
RTS |
5 |
CTS |
|
2 |
DTR |
6 |
DSR |
|
3 |
TXD |
3 |
RXD |
|
4 |
Signal Ground |
7 |
Signal Ground |
|
5 |
Signal Ground |
7 |
Signal Ground |
|
6 |
RXD |
2 |
TXD |
|
7 |
DSR |
20 |
DTR |
|
8 |
CTS |
4 |
RTS |