Oracle Exadata Storage Server X9-2 EF, HC, and XT Service Manual Servicing Storage Drives Removing and Replacing an NVMe Storage Drive Using Oracle Solaris Remove an NVMe Storage Drive Remove an NVMe Storage Drive Perform this procedure to physically remove an NVMe storage drive from the server. Identify the physical location of the NVMe drive that you want to remove. For storage drive locations, see Remove a Storage Drive. Verify that the OK to Remove indicator (LED) on the NVMe storage drive is lit. On the drive that you plan to remove, push the latch release button to open the drive latch. See Remove a Storage Drive. Grasp the latch and pull the drive out of the drive slot. Consider your next steps: If you are replacing the drive, continue to Verify Removal of an NVMe Storage Drive, and then Install an NVMe Storage Drive. If you are not replacing the drive, install a filler panel in the empty drive slot to maintain proper airflow and perform administrative tasks to configure the server to operate without the drive. For information on how to install a storage drive filler panel, see Remove and Install Filler Panels.